Troubleshooting
Problem
Instructions for replacing the I/O Legacy board
Resolving The Problem
Notes:
- Existing system configuration will be lost. If possible, save the existing system configuration or obtain a previously saved copy.
- After replacing the I/O Legacy board, flash the system with the latest level BIOS. Match the BIOS level currently installed on the system.
| Removing the I/O Legacy board |
|---|
Note: The presence of AC standby power might result in damage to the hardware unless you disconnect the power cord for each power source from the electrical outlet.
- Power-off the server off, if it is on.
- Disconnect the power cord for each power source from the electrical outlet.
- Remove the top cover.
- Disconnect the shuttle.
- Remove the shuttle.
- Remove the four shuttle screws.
- Push in on the shuttle touchpoints.
- Separate the shuttle from the I/O Legacy board.
- To replace the I/O Legacy board, reverse this procedure.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18R","label":"Older System x->xSeries 250"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN15","label":"Older System x->Netfinity 7600"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-45411