Product Documentation
Abstract
Technical overview for Mellanox ConnectX-2 Dual-Port 10 Gigabit Ethernet Adapter for IBM System x.
Content
Overview
The Mellanox ConnectX-2 Dual-Port 10 Gigabit Ethernet Adapter for IBM System x is a member of IBM's comprehensive networking portfolio of 1 Gigabit Ethernet and 10 Gigabit Ethernet adapters and delivers industry-leading performance and scalability. Protocol offload enables faster application completion and better server utilization. Furthermore, the ability to use fiber optics or twin-ax copper allows you to deploy the fabric of your choice.
Features and functions:
Mellanox ConnectX-2 Dual-Port 10 Gigabit Ethernet Adapter for IBM System x (81Y9990)
- Dual-channel, 10 Gigabit/s Ethernet link speed
- 10GBASE-SR short wave lasers with LC type connector
- Stateless offloads, including TCP/UPD/IP checksum offload
- Receive side scaling
- Large/Giant Send Offload, Large Receive Offload
- PCIe Gen 2 and small from-factor design (MD-2)
- RDMA offloaded transport over Ethernet
- Virtual embedded switching (VEB, VEPA, VEPA+)
- Enhanced QoS
At a Glance
The Mellanox ConnectX-2 Dual-Port 10 Gigabit Ethernet Adapter for IBM System x (81Y9990) provides an ideal solution for all servers needing high- performance, low-latency data transfer in LAN connectivity for mission- critical applications. This network adapter provides support for 10 Gigabit Ethernet networking with optical or copper connectivity.
The adapter features:
- Maximizes I/O consolidation with high-performance 10 Gigabit Ethernet ports
- Leverages existing IT investments
- Offers low-latency Ethernet for faster application completion and better server unitlization
- Is built on a standards-based design to enable open architectures
- Uses proven, most-deployed low-latency technology
- Is backed by industry-renowned IBM serviceability, education, support and training
Key prerequisites
A selected System x server with an available PCI Express expansion slot.
Warranty
- Warranty is One year
- Service type (IOR/IOE/CCE/CCR) CRU
Physical specifications
Mellanox ConnectX-2 Dualport 10 Gigabit Ethernet Adapter for IBM System x (81Y9990)
- Approximate height: 167 mm (6.60 inch)
- Approximate width: 69 mm (2.71 inch)
- Approximate depth: 17.3 mm (0.6875 inch)
- Approximate weight: 208 g (0.46 lb)
Shipping dimensions :
- Approximate height: 189 mm (7.51 inch)
- Approximate width: 90 mm (3.54 inch)
- Approximate depth: 38 mm (1.50 inch)
- Approximate weight: 450 g (0.99 lb)
Approvals and Safety
- EN55022
- EN55024
- EN60950-1
- EN 61000-3-2
- EN 61000-3-3
- IEC 60950-1
- FCC Part 15 Class A
- UL 60950-1
- CSA C22.2 60950-1-07
- VCCI
- NZ AS3548 / C-tick
- RRL for MIC (KCC)
- BSMI (EMC)
- IECS-003:2004 Issue 4
Operating Environment
Temperature and Altitude:
-
Operating :
- 10 to 35 degrees C (50 to 95 F) at an altitude of 0 to 914 m (0 to 3,000 ft)
- 10 to 32 degrees C (50 to 90 degrees F) at an altitude of 914 to 2133 m (3,000 to 7,000 ft)
-
Relative Humidity :
- 20% to 80% (non-condensing)
-
Maximum Altitude :
- 2,133 m ( 7,000 ft)
Product marketing and replacement part numbers (FRU)
| Description | Marketing part number | Replacement part number |
|---|---|---|
| Mellanox ConnectX-2 Dual-Port 10 Gigabit Ethernet Adapter for System x | 81Y9990 | 81Y9993 |
Hardware requirements
The adapter must be installed in a selected System x server systemCenter.
Software requirements
The Mellanox Dual-Port 10 Gigabit Ethernet Adapter supports the following major operating systems:
- Microsoft Windows Server 2003
- Windows Server 2008
- Windows 2008 R2
- Red Hat Enterprise Linux 4
- Red Hat Enterprise Linux 5
- SUSE Linux Enterprise Server 10
- SUSE Linux Enterprise Server 11
Compatibility
For latest compatibility information, visit
http://www.ibm.com/servers/eserver/serverproven/compat/us/
Note: Some configurations may not be compatible.
Limitations
None.
Document Location
Worldwide
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5086219