IBM Support

Overview - IBM C117 17-inch FST CRT Monitor (Type 4938)

Product Documentation


Abstract

Features and technical details of the IBM C117 17-inch FST CRT Monitor

Content

IBM C117 Monitor

Technical specifications
Monitor size / Viewable image size

17 inch (432 mm) / 15.9 inch (406 mm)

  • Height: 402 mm (15.8 in)
  • Width: 410 mm (16.1 in)
  • Depth: 420 mm (16.5 in)
  • Weight: 15.5 kg (34.1 lb)
Maximum resolution 1280 x 1024
Dot pitch

0.27 mm
Response time 16 ms
Frequency 30 - 69 Khz
Input signal Analog (RGB Analog + separate H&V Syncs)
Power requirements

Input voltage: 100 to 240 V ac +/- 10% (universal voltage)
Frequency: 50/60 Hz

Power consumption:

  • Maximum: < 30 watts to < 60 watts (depends on monitor)
  • Normal use: < 30 watts to < 60 watts typical (depends on monitor)
  • VESA standby: < 2 watts
  • VESA suspend: < 2 watts
  • VESA off: < 2 watts at 100 V ac and 240 V ac

Maximum earth leakage current:

  • < 3.5 mA at 264 V
  • < 0.35 mA at 100 V

Actual power consumption depends on the chosen display mode, the images displayed, and user control settings.

Warranty

3 year limited warranty - Customer Carry-in /Repair (CCE/CCR) or Customer Mail-in using Rapid Replacement Service*

  • Announce date: 06 Dec 2005 (Worldwide)
  • Planned availability date: 15 Dec 2005 (Worldwide)

* If warranty service is required, call IBM Support. IBM Support will assist with problem determination and initiate shipment of a replacement unit, if needed, to the customer's location by express delivery. For calls received by 5:00 p.m. customer's time, in most cases, the replacement unit will arrive within two business days (excluding holidays). The replacement unit becomes the property of the customer in exchange for the failed unit, which becomes the property of IBM. Pack the failed unit into the shipping carton that contained the replacement unit and return to IBM. Transportation charges, both ways, are paid by IBM. Failure to use the carton in which the replacement unit was received could result in charges incurred by the customer for damage to the failed unit during shipment.

Compatibility

These models have been tested with IBM eServer xSeries and BladeCenter servers, and are compatible with systems and graphics adapters which comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8, adopted September 17, 1998.

Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective. Horizontal and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.

Refer to the IBM ServerProven compatibility Web site for specific hardware compatibility information.

Shipment group
  • IBM C117 17-inch FST CRT Monitor
  • Attached tilt stand that can be removed
  • Attached 1.8 meter analog video signal cable (15-pin D to 15-pin D)
  • CD containing multilingual user's guide, set-up test pattern, and Windows installation file
  • Setup guide
  • Safety and warranty guide
  • Appropriate country-unique power cord

Agency approvals

Safety: UL (United States), CSA (Canada), CE (Europe), IEC950 CB Report (International), NEMKO (Norway), SEMKO, DEMKO (Denmark), FIMKO (Finland), TUV (Germany), CCC (China), NOM (Mexico), SASO (Saudia Arabia), GOST (Russia), GS, MIC (Korea)

EMC: FCC B (United States), IC (Canada), CE (Europe), Korean, Australia, VCCI Class B (Japan), New Zealand, BSMI (Taiwan), CCC (China)

Emissions: TCO-99, MPR-2 (Sweden), MPR-3 (Sweden)

Ergonomics: ISO/DIS 13406 Part 2

Software: Windows Hardware Logo Program

Additional product information
//www.ibm.com/i/v14/icons/fw.gif Service parts - Parts listing for your product
//www.ibm.com/i/v14/icons/fw.gif User's Guide
//www.ibm.com/i/v14/icons/fw.gif Troubleshooting - Step-by-step instructions for solving common issues

 

Document Location

Worldwide

Operating System

IBM Monitors:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW3C1","label":"IBM Monitors->C117 Monitor"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-62193

Page Feedback