Overview - IBM T120 20.1-inch TFT Flat Panel Monitor (Type 4945)

3 year limited warranty - Customer Carry-in /Repair (CCE/CCR) or Customer Mail-in using Rapid Replacement Service*

• Announce date: 06 Dec 2005 (Worldwide)
• Planned availability date: 15 Dec 2005 (Worldwide)

* If warranty service is required, call IBM Support. IBM Support will assist with problem determination and initiate shipment of a replacement unit, if needed, to the customer's location by express delivery. For calls received by 5:00 p.m. customer's time, in most cases, the replacement unit will arrive within two business days (excluding holidays). The replacement unit becomes the property of the customer in exchange for the failed unit, which becomes the property of IBM. Pack the failed unit into the shipping carton that contained the replacement unit and return to IBM. Transportation charges, both ways, are paid by IBM. Failure to use the carton in which the replacement unit was received could result in charges incurred by the customer for damage to the failed unit during shipment.

Note: A 20.1-in flat panel LCD monitor has more than 2.4 million subpixel transistors laid over an area exceeding 107 square inches. Cost-effective manufacturing processes introduce a small number of defective subpixel transistors. The TFT LCD and CRT monitors are considered within specification with up to five nonadjacent subpixels as follows:

• < = Three bright
• < = Six dark
• < = Eight total bright and dark

These models have been tested with IBM eServer xSeries and BladeCenter servers, and are compatible with systems and graphics adapters which comply with the relevant parts of "VESA and industry standards and guidelines for computer display monitor timing" Version 1.0 Revision 0.8, adopted September 17, 1998.

Supported display modes and number of colors are a function of the attaching system unit. The full range of display modes, refresh rates, and number of colors available with this monitor may not be available or supported with all combinations of system units, their operating systems, and application software. Implementation of monitor Plug and Play follows the VESA DDC standard. This standard must also be implemented in the attaching system unit hardware and software to be effective. Horizontal and vertical-synchronization signal timings are critical in order to achieve acceptable screen images. As a consequence, support for all possible variations in H- and V-sync timings for any display mode cannot be assumed.

Refer to the IBM ServerProven compatibility Web site for specific hardware compatibility information.

• IBM T120 20.1-inch TFT Flat Panel Monitor
• Attached tilt stand that can be removed
• 1.8 meter analog video signal cable (15-pin D to 15-pin D)
• 2.0 meter digital video signal cable (DVI-D to DVI-D)
• CD containing multilingual user's guide, set-up test pattern, and Windows installation file
• Setup guide
• Safety and warranty guide
• Appropriate country-unique power cord