Features and specifications - IBM eServer xSeries 380

Content

The following provides a summary of the features and specifications for the eServer xSeries 380 server.

• Intel® Itanium® processor
• 2MB level 3 cache for (733MHz) processor or 4MB for (800MHz) processor
• 133MHz front side bus (FSB)
• Support for up to four processors

• Standard: 1GB (4 x256MB DIMMS)
• Maximum: 64GB (64x 1GB DIMMS)
• Type: PC100 version 1.2 buffered, ECC, SDRAM
• Slots: 64 dual in-line

• Diskette: IDE 120MB (LS120)
• CD-ROM: IDE
• Hard disk drives: Two 36GB hot-swap low voltage differential SCSI (LVDS) drives installed

• Eight hot-swap 66MHz 64-bit 2)
• Two non-hot-swap 33MHz 64-bit located in restricted area (unsupported)

Air temperature

• 5°to 35°Celsius (50°to 95°Fahrenheit)

Heat output
Approximate heat output in British thermal units (BTU) per hour: 6174 BTU/hr

• Four 800 Watt (110-208 V ac)

• ATI RAGE controller
• Compatible with SVGA and VGA
• 8MB video memory

• Height: 31.12cm (12.25 inches, 7u)
• Depth: 44.45cm (17.5 inches)
• Width: 71.12cm (28.0 inches)
• Weight: 68.1kg (150 lbs) depending on configuration of ATI RAGE controller

• Six hot-swap fan assemblies
• Four 172 mm fans
• Two 120 mm fans
  

• Front clearance: 7.62cm (3 inches)
• Rear clearance: 20.32cm (8 inches)

• Ultra3 low voltage directive SCSI (LVDS) controller
  
• Integrated service processor
• Video port
• Mouse port
• Keyboard
• Parallel port
• Two serial ports
• Two Universal Serial Bus (USB) ports System controls and indicators
• Basic Input/Output System (BIOS), Power on Self Test (POST), and Setup Utility stored in a flash memory device.

Note: KB equals approximately 1000 bytes. MB equals approximately 1000000 bytes. GB equals approximately 1000000000 bytes. Click here to determine if an adapter is supported for Hot Plug operation on the xSeries 380, or check with your hardware adapter vendor for information and support.