Features and specifications - IBM eServer xSeries 300

Content

The following provides a summary of the features and specifications for the eServer xSeries 300 server. Depending on the server model, some features and specifications might not apply.

Note: KB equals approximately 1000 bytes. MB equals approximately 1000000 bytes. GB equals approximately 1000000000 bytes.

Supports either of the two listed microprocessors (depending on your model)

One Intel Pentium III with 256 KB Level-2 cache and MMX (MMX2) technology
or
One Intel Celeron with 128 KB Level-2 cache and MMX (MMX2) technology

• Minimum: 128MB
• Maximum: 1.5GB
• Type: PC133 MHz, ECC SDRAM, unregistered DIMMs only
• Slots: Three dual inline
• Supports 128, 256, and 512MB DIMMs

• Diskette: 1.44MB
• CD-ROM: 24x IDE
• Supports up to two hard disk drives

• Two 3.5 inch slim-high bays for hard disk drives

• Two 33MHz/ 32-bit on the system board

• 200W (110 or 220V AC auto-sensing) with Wake on LAN support

• S3 Savage 4 Pro video on system board
• Compatible with SVGA and VGA
• 8MB SDRAM video memory

• Height: 4.37cm (1.75 inches, 1U)
• Depth: 63.5cm (25 inches)
• Width: 44cm (17.32 inches)
• Maximum weight: 19.05kg (42lb) depending on configuration

• Dual 10BASE-T/100BASE-TX Ethernet controllers on the system board with Alert on LAN™ 2 support
• Serial port
• Two USB ports
• Keyboard port
• Mouse port
• Dual-channel bus mastering IDE controller

• All models-Dual-channel bus mastering IDE controller
• Some models-SCSI adapter (Adaptec Ultra160) is installed in one of the expansion-slots

• Sound power, idling: 6.6 bel maximum
• Sound power, operating: 6.8 bel maximum

Air temperature

• Server on: 10° to 35°Celsius (50.0° to 95.0°Fahrenheit). Altitude: 0 to 914m (2998.7 ft)
• Server on: 10° to 32°Celsius (50.0° to 89.6°Fahrenheit). Altitude: 914m (2998.7 ft) to 2133m (6998.0 ft)
• Server off: -40° to 60°Celsius (-104° to 140°Fahrenheit). Maximum altitude: 2133m (6998.0 ft)

Humidity

• Server on: 8% to 80%
• Server off: 5% to 100%

Approximate heat output in British thermal unit (Btu) per hour

• Minimum configuration: 171 Btu (50 watts)
• Maximum configuration: 410 Btu (120 watts)

Sine-wave input (47-63 Hz) required. Input voltage low range:

• Minimum: 90 V ac
• Maximum: 137 V ac

Input voltage high range

• Minimum: 180 V ac
• Maximum: 265 V ac

Input kilovolt-amperes (kVA) approximately

• Minimum: 0.095 kVA
• Maximum: 0.213 kVA