Overview - 36.4GB Ultra320 SCSI Hot Swap SL hard disk drive

Content

At a glance
36.4GB 15,000 rpm Ultra320 SCSI Hot-swap slimline hard disk drive

• Wide bandwidth Ultra320 SCSI for up to 320MBps data transfers
• 15,000 rpm spindle speeds reduce latency and seek times
• Predictive Failure Analysis (PFA) helps warn of problems before they occur
• 80-pin, SCA-2 compliant hot swap-drive trays with front side labeling

Overview

The 3.5 inch, 1 inch high 36GB 15,000 rpm Ultra320 SCSI Hot-swap slim line hard disk drive is based on Ultra320 SCSI technology.

Performance

• 320MBps instantaneous data transfers to an Ultra320 SCSI controller
• 15,000-rpm spindle speeds
• 2.0ms average latency
• 3.6ms typical average read seek time

Reliability

• SCA-2 compliant trays - hard disk drives dock directly into the hot-swap back-plane of supported servers
• Predictive Failure Analysis (PFA) - Can alert you of most impending drive failures before they occur
• Rigorously tested through the ServeProven program - Peace of mind that your xSeries server storage subsystem is compatible and functions reliably

Warranty

• 3 year Customer Carry-in Exchange/Repair (CCE/CCR)

Packaging
You will receive one box containing the following items:

• Hard disk drive assembly mounted on hot-swap tray
• Installation publications and warranty

Product dates

Worldwide

• Announce date: 11 June 2002
• Planned availability date: 30 July 2002
• Withdrawal date: 29 Jul 2003

Technical specifications
Physical, environmental, and compatibility specifications as known at time of announcement

• Formatted capacity - 36,400MB (1)
• Rotational speed - 15,000 rpm
• Typical average read seek time - 4.1ms
• Data transfer rate (maximum bursting) - 320MBps
• Average latency - 2.00ms
• Interface - Ultra320 SCSI
  
  (1) 1MB equals 1,000,000 bytes. Total user-accessible capacity may vary based on operating environments.

Physical specifications

• Height: 25.4 mm (1.00 in)
• Width: 101.6 mm (4.00 in)
• Depth: 146.0 mm (5.75 in)
• Weight: 0.780 kg (1.3 lb)
  

Temperature

• 10 to 35 degrees Celsius (50 to 95 degrees Fahrenheit) at 0 to 914m (0 to 3,000 ft)
• 10 to 32 degrees Celsius (50 to 90 degrees Fahrenheit) at 914m to 2,133 (3,000 to 7,000 ft)

Relative humidity

• 8% to 80% (non-condensing)

Agency approvals

• UL
• CSA
• TUV
• CE Mark
• C-Tick Mark (AS/NZS 3548 Class A)
• IEC
• Taiwan (BSMI Type Certification)
• Korean EMI
  

ENERGY STAR-Compliant
No.

NOTE: The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware requirements for IBM systems

Hardware requirements for non-IBM systems

• Not applicable

Software requirements

• The 36GB 15,000 rpm Ultra320 SCSI Hot-swap slim-line hard disk drive is supported by the same operating system and application software as the server in which it is installed.

Limitations

• None