Overview - 18.2GB and 36.4GB 10K-rpm Ultra160 SCSI HDD's

Content

• Publications

At a Glance
Deploy IBM xSeries and IntelliStation workstations using next generation HDD technology for Ultra160 SCSI environments. Features include:

• 1-inch, slim-line form factor -- Optimize storage capacity of supported systems and EXP storage units
• 10,000-rpm HDDs -- Deliver solid reliability and performance
• Predictive Failure Analysis (PFA) -- Alerts you of a problem before it occurs
• Rigorously tested in heavy network simulation test suites
• Available in Ultra160 SCSI hot-swap and standard versions:
  • Ultra160 SCSI interface -- Wide bandwidth for multi-drive, concurrent, streaming data transfers
  • 80-pin, SCA-2 compliant hot-swap drive trays with convenient front-side labeling -- Supports xSeries servers and EXP storage units with hot-swap bays
  • 68-pin standard drive -- Supports xSeries servers and IntelliStation workstations without hot-swap drive bays

Overview
Choose high-performance, next generation IBM drive technology to complete your IBM eServer xSeries or IntelliStation storage solution. These new SCSI HDDs are available to satisfy a range of storage requirements.

Each drive is contained in a 3.5-inch, 1-inch high, slim-line form factor that allows maximum installations in supported xSeries servers and IntelliStation workstations. Engineered to support enterprise server and workstation applications, they are available in cost-effective, 10,000-rpm versions.

Next Generation HDDs

• For xSeries servers with hot-swap bays and EXP storage units select:
  • 18.2 GB(1) 10K-rpm Ultra160 SCSI Hot-Swap SL HDD
  • 36.4 GB 10K-rpm Ultra160 SCSI Hot-Swap SL HDD
• For xSeries with standard drive bays and IntelliStation models select:
  • 18.2 GB 10K-rpm Ultra160 SCSI SL HDD
  • 36.4 GB 10K-rpm Ultra160 SCSI SL HDD

High-Density and Performance
Through advanced areal density technology, these HDDs store a large amount of data on each platter. This optimizes the storage capacities of supported systems, while providing solid storage subsystem performance. Performance characteristics include:

• 10,000-rpm spindle speed -- 3.0 ms average latency and 4.9 ms typical average read seek time
• Ultra160 SCSI interface -- Supports instantaneous interface data transfers of up to 160 MB/s

Reliability

• SCA-2 compliant (hot-swap version) -- HDDs dock directly into the hot-swap backplane of supported products
• Predictive Failure Analysis (PFA) -- Can alert you of impending drive failures so replacements can be made before a problem occurs
• Rigorously tested through the ServerProven program -- Peace of mind that your xSeries and IntelliStation storage subsystem is compatible and will function reliably
• Three-year, limited warranty(2)

(1) When referring to hard drive capacity, GB stands for one billion bytes. Total user-accessible capacity may vary depending on operating environments.
(2) For information on the IBM Statement of Limited Warranty, visit: http://www.ibm.com/servers/support/machine_warranties/

Warranty
3 year CCE

Packaging
You will receive one box containing the following items:

• HDD assembly (mounted on a hot-swap tray on hot-swap version)
• Installation publications and warranty

Product marketing and replacement part numbers (FRU)
Part numbers applicable to: 18.2 GB 10K-rpm Ultra160

• Marketing part number: 06P5750
• Replacement part number: 06P5365

• Marketing part number: 06P5751
• Replacement part number: 06P5367

Part numbers applicable to: 18.2 GB 10K-rpm Ultra160 SCSI Hot-Swap SL HDD

• Marketing part number: 06P5754
• Replacement part number: 06P5758 (with tray)
• Drive only - 06P5369

• Marketing part number: 06P5755
• Replacement part number: 06P5759 (with tray)

Product dates
World-Wide

• Announce date: 27 Nov 2001
• Planned availability date: 27 Nov 2001
• Withdrawal date: 29 Jul 2003

Technical specifications
Performance specifications as known at time of announcement
18.2 GB 10K-rpm HDD Options

• Formatted capacity: 18,200 MB(3)
• Rotational speed: 10K rpm
• Typical average read seek time: 4.9 ms
• Data transfer rate (maximum bursting): 160 MB/s
• Average latency: 3.00 ms
• Interface: Ultra160 SCSI

36.4 GB 10K-rpm HDD Options

• Formatted capacity: 36,400 MB
• Rotational speed: 10K rpm
• Typical average read seek time: 4.9 ms
• Data transfer rate (maximum bursting): 160 MB/s
• Average latency: 3.00 ms
• Interface: Ultra160 SCSI

(3) 1 MB equals one million bytes. Total user-accessible capacity may vary based on operating environments.

Physical, environmental, and compatibility specifications as known at time of announcement

• Approximate height: 25.4 mm (1.00 in)
• Approximate width: 101.6 mm (4.00 in)
• Approximate depth: 146.0 mm (5.75 in)
• Approximate weight: .780 kg (1.3 lb)

• Between 10 degrees Celsius and 35 degrees Celsius (0 to 914 m)
• Between 50 degrees Fahrenheit and 95 degrees Fahrenheit (0 to 3,000 ft.)

• Between 10 degrees Celsius and 32 degrees Celsius (914 to 2,133 m)
• Between 50 degrees Fahrenheit and 90 degrees Fahrenheit (3,000 to 7,000 ft.)

• Operating: between 8% and 80% (non-condensing)

Agency approvals

• UL
• CSA
• TUV
• CE Mark
• C-Tick Mark (AS/NZS 3548 Class A)
• IEC
• Taiwan (BSMI Type Certification)
• Korean EMI

ENERGY STAR-Compliant
No. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.

Hardware requirements for IBM systems
The Ultra160 hot-swap HDD options are supported in Ultra2 or Ultra160 modes in the hot-swap drive bays of the following xSeries, Netfinity(R), and EXP products:

The non-hot-swap Ultra160 SCSI HDD options are supported in Ultra2 or Ultra160 modes in the standard drive bays of the following xSeries servers.

Non-hot-swap Ultra160 HDD options are supported in the following IntelliStation systems.

Software requirements
These options are supported by the same operating system and application software as the system or EXP storage unit in which it is installed.

Document notes

1. The symbol * means that the information is currently unavailable for this product.
2. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
3. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.