Overview - IBM NetBAY 1U Flat Panel Monitor Console Kit and APC 2U Smart-UPS 1400

Content

Overview
New rack options provide greater flexibility, save valuable rack space, and add installation convenience to your NetBAY rack solutions.

NetBAY 1U Flat Panel Monitor Console Kit
This high-density, 1 U rack option comes complete with many of the key components to quickly setup and monitor xSeries rack-mounted servers. It includes:

• High resolution 15-inch flat panel monitor
• Slide rails
• Cable management and console switch mounting brackets
• U.S. Space Saver 2 Keyboard included with (32P1031)
• Three-year, limited warranty(1)

APC 2U Smart-UPS 1400 RMB, RMiB, and RMJiB
In the event of a power outage, the APC 2U Smart-UPS 1400 RMB and RMiB (APC 2U Smart-UPS 1400 RMJiB in Japan) give you backup power to support IBM xSeries in high-availability and business-critical applications. These 2 U, rack-mounted, uninterruptible power sources (UPS) by American Power Conversion (APC) are designed to temporarily handle power requirements until normal power can be restored or to facilitate an orderly shutdown.

Features include:

• Hot-swap batteries - User replaceable
• Intelligent battery management - Increases battery performance, life, and reliability
• Convenient indicators alert you to problem events:
  • Overload
  • Battery replacement
  • Site wiring fault
• Automatic voltage regulation (AVR) - Adapts to under voltages without draining the battery
• SmartSlot - Customize and enhance management of your UPS by installing one of various accessory cards (available from APC) into the unit
• Compatibility
  • PowerChute Plus software - works with IBM Director to monitor and manage server systems
  • IBM ServerProven for configuration compatibility
  • Raven-black
  • Three-year, limited warranty provided by APC(2)

At a Glance
NetBAY 1U Flat Panel Monitor Console Kit and APC 2U Smart-UPS 1400 -- New, high-density rack options deliver complete monitoring function and power backup while consuming less rack space.

NetBAY 1U Flat Panel Monitor Console Kit

• Includes 15-inch, high resolution monitor
• Can be ordered with with or without a US space-saver keyboard with TrackPoint
• Tested to easily integrate into xSeries rack solutions
• Designed for rapid installation
• 1 U rack mountable

APC 2U Smart-UPS 1400

• 1400 Volt Amps (VA) and 950 W load capacity
• 2 U rack mountable
• Ability to manage and monitor the UPS via PowerChute software
• Intelligent battery management alerts you to the need to replace battery before failure occurs

General features

• High-density preserves valuable rack space and allows more room for other rack components
• ServerProven support for configuration and compatibility with xSeries servers and NetBAY rack products

(1) For US, PCNA, and CAN, for information on the IBM Statement of Limited Warranty, visit: http://www.ibm.com/servers/support/machine_warranties/. Alternatively, this information is also available by calling 1-800-772-2227 or contacting your IBM representative or reseller. Copies are available upon request.

For AP, LA, and EMEA, for information on warranty, contact your local IBM representative. Copies are available upon request.

(2) IBM makes no warranties, express or implied, for non-IBM products including the warranties of merchantability and fitness for a particular purpose. IBM is not responsible for warranty, service, or support for this product. Please contact APC for warranty or service details.

Warranty
3 year

NOTE: IBM is not responsible for warranty, service, or support for the APC 2U Smart-UPS 1400. Please contact APC for warranty or service details.

This product replaces

• None

• Not Applicable

Packaging
You will receive one box containing the following items:
APC 2U Smart-UPS 1400

• Base APC UPS
• 6-foot power cord
• Smart UPS signaling RS-232 cable
• Rail set with rear brace
• PowerChute Plus software CD
• User manual and warranty information

NetBAY 1U Flat Panel Monitor Console Kit

• Keyboard tray and flat panel monitor (keyboard included with NetBAY 1U Flat Panel Monitor Console Kit 32P1031)
• Installation instructions and Warranty

Product marketing and replacement part numbers (FRU)
Part numbers applicable to: World-Wide
APC 2U Smart-UPS 1400 RMB

• Marketing part number: 32P1020
• Replacement part number: None

APC 2U Smart-UPS 1400 RMiB

• Marketing part number: 32P1022
• Replacement part number: None

NetBAY 1U Flat Panel Monitor Console Kit (with US keyboard)

• Marketing part number: 32P1031
• Replacement part number:
  
  Keyboard tray w/monitor 32P1098
  Rack mounting hardware 32P1099
  Cable management arm 32P1601

NetBAY 1U Flat Panel Monitor Console Kit (without keyboard)

• Marketing part number: 32P1032
• Replacement part numbers:
  
  Keyboard tray w/monitor 32P1098
  Rack mounting hardware 32P1099
  Cable management arm 32P1601

Part numbers applicable to: Japan
APC 2U Smart-UPS 1400 RMJiB

• Marketing part number: 32P1024
• Replacement part number: None

Product dates
Worldwide

• Announce date: 30 Oct 2001
• Planned availability date: 30 Oct 2001
• Withdrawal date: n/a
• Effective withdrawal date: n/a

Technical specifications
Performance specifications as known at time of announcement
APC 2U Smart-UPS 1400 RMB
Output

• Rated power - 1,400 VA
• Output power capacity - 950 watts
• Nominal output voltage - 120 V
• Output voltage note - Nominal output voltage
• Output connections - Six Nema 5-15R outlets
• Waveform type - Sinewave

Input

• Nominal input voltage - 120 Vac
• Input frequency - 50/60 Hz +/-3 Hz (auto sensing)
• Power cord length - 6 feet - Nema L5-15P connection to source
• Input voltage range for main operations - 82 to 147 V
• Input voltage adjustable range for main operations - 75 to 154 V

APC 2U Smart-UPS 1400 RMiB
Output

• Rated power - 1,400 VA
• Output power capacity - 950 watts
• Nominal output voltage - 230 V
• Output voltage note - Configurable for 220, 225, 230, or 240 V
• Output connections
  • Four IEC 320 C13
  • Two IEC jumpers
• Waveform type - Sinewave

Input

• Nominal input voltage - 230 Vac
• Input frequency - 50/60 Hz +/-3 Hz (auto sensing)
• Input connection type - IEC-320 C14
• Input voltage range for main operations - 160 to 286 V
• Input voltage adjustable range for main operations - 151 to 302 V

APC 2U Smart-UPS 1400 RMJiB
Output

• Rated power - 1,400 VA
• Output power capacity - 950 watts
• Nominal output voltage - 100 V
• Output voltage note - Nominal output voltage
• Output connections - Six Nema 5-15R outlets
• Waveform type - Sinewave

Input

• Nominal input voltage - 100 Vac
• Input frequency - 50/60 Hz +/-3 Hz (auto sensing)
• Power cord length - 6 feet - Nema L5-15P connection to source
• Input voltage range for main operations - 74 to 123 Vac
• Input voltage adjustable range for main operations - 67 to 130 V

Batteries

• Typical backup time at half load - 26.5 minutes
• Battery type - Maintenance-free sealed lead-acid battery with suspended electrolyte, leakproof
• Typical recharge time - 3 hours
• Replacement battery cartridge - RBC24

Communications and management

• Interface port - DB-9 RS232, Smart-Slot card
• Smart-Slot interface quantity - 1
• Management software included - PowerChute Smart-UPS Bundle
• Control panel - LED status display with load and battery bar-graphs and On-line; On Battery; Replace Battery; and Overload Indicators
• Audible alarm - Alarm when on battery; distinctive low battery alarm; configurable delays
• Emergency Power Off (EPO) - Provided through a cable included with the unit

Surge protection and filtering

• Surge energy rating - 480 Joules
• Filtering - Full time multi-pole noise filtering: 0.3 IEEE surge let-through: zero clamping response time: meets UL 1449

Physical, environmental, and compatibility specifications as known at time of announcement

APC 2U Smart-UPS 1400 RMB, RMiB, and RMJiB
Dimension

• Approximate height: 88.9 mm (3.5 in)
• Approximate width: 482.6 mm (19.0 in)
• Approximate depth: 457.2 mm (18.0 in)
• Rack height: 2 U
• Approximate weight: 28.64 kg (63.0 lb)

Shipping dimensions

• Approximate height: 251.0 mm (9.9 in)
• Approximate width: 593.9 mm (23.4 in)
• Approximate depth: 603.3 mm (60.3 in)
• Approximate weight: 31.9 kg (70.2 LB)

NetBAY 1U Flat Panel Monitor Console Kit
Shipping dimensions

• Height: 177.0 mm (7.0 in)
• Width: 609.0 mm (24.0 in)
• Depth: 876.0 mm (34.5 in)
• Weight: 17.0 kg (37.0 LB)

Operating temperature
APC 2U Smart-UPS 1400 RMB, RMiB, and RMJiB

• Between 0 degrees Celsius and 40 degrees Celsius (at 0 to 3,000 m)
• Between 32 degrees Fahrenheit and degrees 104 Fahrenheit (at 0 to 10,000 ft)

• Operating: between 0% and 95%

Maximum altitude
APC 2U Smart-UPS 1400 RMB, RMiB, and RMJiB

• 3,000 m (10,000 ft)

Electrical specifications
APC 2U Smart-UPS 1400 RMB

• 82 - 147 VAC
• 12 A
• 50/60 Hz

APC 2U Smart-UPS 1400 RMiB

• 220 - 240 VAC single phase
• 6 A
• 50/60 Hz

APC 2U Smart-UPS 1400 RMJiB

• 74 - 123 VAC
• 12 A
• 50/60 Hz

APC 2U Smart-UPS 1400 RMB, RMiB, and RMJiB

• Audible noise at 1 meter - 46 dBA
• Online thermal dissipation - 171 BTU/hr

Agency approvals
APC 2U Smart-UPS 1400 RMB AND RMiB

• FCC - Verified to comply with Part 15 of the FCC Rules for a Class A digital device
• UL 1778
• CSA C22.2 Number 950
• NOM
• CE Mark (EN55022 Class A)
• C-Tick Mark (AS/NZS 3548 Class A)
• VDE EN50091-1-1 and 60950
• GOST - Russia
• CCIB, CCEE - China
• Type Approval - South Korea
• Taiwan (BCIQEMC Type Certification)(*)

APC 2U Smart-UPS 1400 RMJiB

• VCCI Class A - Japan
• UL 1778

NetBAY 1U Flat Panel Monitor Console Kit

• FCC - Verified to comply with Part 15 of the FCC Rules for a Class A digital device
• UL 1778
• CSA C22.2 Number 950
• NOM
• CE Mark (EN55022 Class A)
• C-Tick Mark (AS/NZS 3548 Class A)
• VDE EN50091-1-1 and 60950
• GOST - Russia
• CCIB, CCEE - China
• Type Approval - South Korea
• Taiwan (BCIQEMC Type Certification)
• VCCI Class A - Japan

Hardware requirements for IBM systems
The APC 2U Smart-UPS 1400 must be installed in a Netfinity or NetBAY rack or an 19-inch, EIA-310-D industry-standard rack.

The NetBAY 1U Flat Panel Monitor Console Kit options are supported in NetBAY and Netfinity rack cabinets.

Software requirements
APC PowerChute Plus software included with APC 2U Smart-UPS 1400 supports the following operating systems:

• NetWare 4.x, 5.x
• Microsoft Windows NT 4.0
• Windows 95
• Windows 98
• Windows 2000
• Windows XP
• Windows ME
• SCO Open Server 5.0.x
• Unixware V7.x
• Linux
  • Red Hat 5.2, 6.0
  • SuSE 5.3, 6.0, 6.1
  • Caldera 1.3, 2.2
  • Turbo Linux 3.0.1, 3.6

The NetBAY 1U Flat Panel Monitor Console Kit does not have any software requirements.

Compatibility
The APC PowerChute Plus is compatible with IBM Director. The APC 2U Smart-UPS 1400 units are compatible with all xSeries and Nefinity rack-mounted servers and rack-mounted devices that require AC power.

The NetBAY 1U Flat Panel Monitor Console Kit (without keyboard) is supported with the IBM Space Saver 2 Keyboard (part number 28L3644). This keyboard is available in the following languages:

• 28L3645 - French Canadian
• 28L3646 - Danish
• 28L3647 - French
• 28L3648 - German
• 28L3649 - Italian
• 28L3650 - Spanish
• 28L3651 - UK English
• 28L3652 - Japanese
• 19K3831 - Swiss
• 19K3832 - Swede/Finn
• 19K3833 - Portuguese
• 19K3834 - Belgium/UK
• 19K3835 - LA Spanish
• 19K3836 - Russian
• 19K3837 - Polish

Limitations
APC 2U Smart-UPS 1400 units are designed and tested for use only in rack installations.

Document notes:

1. The symbol * means that the information is currently unavailable for this product.
2. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
3. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product cannot be obtained directly from IBM.