IBM Support

Overview - 3447 Digital Linear Tape Library

Product Documentation


Abstract

Files Publications General information The IBM 3447 Digital Linear Tape Library is an automated tape library supported on selected Netfinity(R) server and IBM PC Server systems. The 3447 Digital Linear Tape Library automates the latest D

Content

 
General information
The IBM 3447 Digital Linear Tape Library is an automated tape library supported on selected Netfinity(R) server and IBM PC Server systems.

The 3447 Digital Linear Tape Library automates the latest DLT7000 tape drives. It includes one removable 10-cartridge magazine and five fixed cells, yielding a total capacity of 15 cartridges. It can be configured with one or two DLT7000 tape drives. The latter offers additional enhanced functions such as faster transfer of data, simultaneous backup, concurrent read-write operations, and fault tolerance.

The Model 105 is a stand-alone desktop unit and the Model 106 can be mounted in an industry-standard EIA-310-D 19-inch rack, such as the IBM 9306 Netfinity(R) Rack Enclosure. It utilizes DLT-format tape cartridges that provide 35GB native capacity and up to 70GB with 2:1 hardware controlled data compression, giving the 3447 a typical storage capacity of up to 1.05TB with compression. The 3447 has a native data rate of 5MB per second and up to 10MB per second with compression. This is equivalent to 36GB per hour with compression on a one-drive model and up to 72GB per hour with compression on a split-host, two-drive model. A bar code reader, allowing for positive tape cartridge identification and inventory, and an operator display are included.

The IBM 3447 Models 105 and 106 can be used for save/restore, program distribution, migration, data interchange, automatic migration of data between disk storage and tape, and mass storage for data archive. Full interchange of data is supported with the IBM 35/70GB Internal Digital Linear Tape Drive (00K7900) using DLT-format cartridges, used in the PC Server 704. In addition to reading and writing on DLT-format tape cartridges, the 3447 provides an enhanced functional alternative to 1/4-inch, 4-mm, or 8-mm tape drives. Storage and tape management for the 3447 is provided by software such as IBM ADSTAR(R) Distributed Storage Manager (ADSM) and other industry-leading compatible software offerings.

NOTE: Although the tape drive in the 3447 provides the capability for high tape performance, other components of the system may limit the actual performance achieved. Also, although the compression technology used in the tape drive can typically double the amount of data stored on the media, the actual degree of compression achieved is highly sensitive to the characteristics of the data being compressed.

The 3447 Digital Linear Tape Library features:

  • Up to 525GB/1050GB data storage capacity
  • Bar code reader
  • External stand-alone desktop or rack-mountable models
  • State-of-the-art cartridge handler designed for reliability
  • Physical or software lockable door
  • Front-panel graphical LCD display
  • Operator control panel


Warranty
1 year

Packaging
You will receive one box containing the following items:

  • 3447 Digital Tape Library
  • Two keys
  • One power cord
  • One 4.5 meter SCSI cable
  • One SCSI terminator
  • One removable cartridge magazine
  • One DLT-format data cartridge, cleaning cartridge, and test tape
  • Setup and Operator Guide
  • Service Guide

Product marketing and replacement part numbers (FRU)
Part numbers applicable to: worldwide

  • Marketing part number: 3447105
  • 3447 Digital Tape Library, Tower Unit
Part numbers applicable to: worldwide
  • Marketing part number: 3447106
  • 3447 Digital Tape Library, Rack Unit

Additional part numbers
Associated
Products(s)

  • Marketing part number: 59H3569
  • Additional drive
  • Marketing part number: 59H3558
  • Cartridge magazine

Part(s)

  • FRU part number: 39H3571
  • Library shell w/Black Bezel
  • FRU part number: 59H3560
  • Power module
  • FRU part number: 59H3561
  • Controller Card, single-ended SCSI
  • FRU part number: 59H3569
  • 6-ft line cord
  • FRU part number: 59H3923
  • Drive to control cable
  • FRU part number: 92F2566
  • Terminator
  • FRU part number: 59H3558
  • Media magazine

Product dates
Worldwide

  • Planned availability date: 10/17/1997
  • Withdrawal date: N/A
  • Effective withdrawal date: N/A
Technical specifications
3447105
Weight:
  • lbs: 92
  • kg: 42
Height:
  • inches: 9.25
  • mm: 23.5
Width:
  • inches: 18.9
  • mm: 48.0
Depth:
  • inches: 26.5
  • mm: 67.3

3447106
Weight:

  • lbs: 72
  • kg: 33
Height:
  • inches: 8.75
  • mm: 22.2
Width:
  • inches: 18.9
  • mm: 48.0
Depth:
  • inches: 26.5
  • mm: 67.3

Physical, environmental, and compatibility specifications as known at time of announcement
Operating temperature

  • Between 10 degrees celsius and 35 degrees celsius
  • Between 50 degrees fahrenheit and 95 degrees fahrenheit
Relative humidity
  • Operating: between 20% and 80%

Wet bulb

  • 23 degrees celsius, maximum
  • 73.4 degrees fahrenheit, maximum

Altitude

  • 1828.8 meters
  • 6000 feet

Voltage

  • 100-137 volts AC
  • 180-240 volts AC, 48-64 Hz auto-ranging

Electrical power

  • 130 watts (typical)
  • 155 watts (maximum) (2 drives)

Inrush current

  • 60 A peak (a 10 A fuse is sufficient for overload protection)

Noise level

  • 5.3 Bels idle; 6.0 Bels operating (desktop)
  • 5.6 Bels idle; 6.2 Bels operating (rack-mounted)

Agency approvals

  • FCC class--A
  • CISPR 22 Level A
  • CUL
  • UL-1950
  • CSA 22.2 No. 950-95
  • TUV/CDE IEC 950/EN 60 950
  • NOM

Hardware requirements for IBM systems

  • 3447 Model 105: Model 105 is a desktop model requiring 3250 sq cm (500 sq in).
  • 3447 Model 106: Model 106 is a 19-inch rack-mounted model requiring five EIA units (22.2 cm, 8.75 in).
  • The 3447 Models 105 and 106 can be attached to Netfinity server and IBM PC Server systems that support:
    • IBM PCI Wide UltraSCSI Adapter (76H5407)
    • Adaptec 2940 Single-ended SCSI Adapter

Hardware requirements for non-IBM systems
Not applicable

Software requirements

The IBM 3447 Digital Linear Tape Library is supported on:

  • Microsoft Windows NT 3.51
  • Microsoft WindowS NT 4.0
  • Novell Netware 4.11

Compatibility
The tape drives in the 3447 are read and write compatible with other DLT-format cartridges and can write and read tapes written in DLTtape-III and DLTtape-IV formats.


Limitations
When attaching the 3447 to the IBM Netfinity server and IBM PC Server systems, it is recommended that only one 3447 be attached.

Supported software
Not Applicable

Other

  • One 4.5 meter SCSI cable is included with each library for attachment to the PC Server.
  • The estimated installation time for the 3447 library is one hour.

Document notes:

  1. The symbol * means that the information is currently unavailable for this product.
  2. All dates are represented in the US English format of mm/dd/yyyy (where mm=month, dd=day, yyyy=year).
  3. FRU stands for Field Replacement Unit. It is the part number used for ordering service/replacement parts.
  4. Effective Withdrawal means that on the given date IBM will have withdrawn the products from marketing. After that date, the product can not be obtained directly from IBM.



 

Document Location

Worldwide

Operating System

System x Hardware Options:All operating systems listed

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00DHS","label":"System x Hardware Options->Tape Library->Tape Library 3447->3447105"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00DHT","label":"System x Hardware Options->Tape Library->Tape Library 3447->3447106"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-4PJKLL