Product Documentation
Abstract
Features and technical details of the Netfinity 9.1GB 15K-RPM Ultra160 SCSI Hot-Swap hard disk drive
Content
General informationTake advantage of the latest SCSI hard disk technology. Install incredibly fast, advanced technology 9.1GB(1) or 18.2GB slim-high 15,000-rpm,Ultra160 SCSI hard disk drives (HDDs) in your Netfinity server or EXP storage unit.
These 3.5-inch, slim-high, hot-swap HDD options expand Netfinity storage solutions for those who need very high-speed data storage for demanding enterprise server applications. Advancements in platter and actuator design allow breakthrough rotational speeds with minimal effect on power consumption or cooling. Each drive assembly is pre-mounted on a "converged" hot-swap tray, common to most Netfinity servers and Netfinity EXP storage units. Deploy Netfinity servers using the latest SCSI HDD technology to significantly improve performance of your storage subsystems.
- Highest performing Netfinity HDDs maximizes storage subsystem performance
- 15,000 rpm HDDs use advanced drive technology -- delivers solid reliability and incredible performance
- Ultra160 SCSI interface -- maximum bandwidth for streaming data transfers
- Converged hot-swap drive tray -- supports most Netfinity servers and EXP storage units
- Predictive Failure Analysis (PFA) can alert you of a problem before it occurs
- Pre-mounted on hot-swap trays -- added convenience and improved reliability
- Rigorously tested in heavy network simulation test suites
- 3 year limited Customer Carry-In Exchange
You will receive one box containing the following items:
- HDD assembly mounted on a Netfinity hot-swap tray
- Installation publications and warranty
Product marketing and replacement part numbers (FRU)
Part numbers applicable to: World Wide
*Withdrawn - not available for purchase through IBM
- Marketing part number: 19K0655* (footnote [1])
- Replacement part number (FRU): 06P5716
- Netfinity 9.1 GB 15K-rpm Ultra160 SCSI Hot-Swap HDD
World Wide
- Announce date: 25 Jul 2000
- Planned availability date: 21 Sep 2000
- Effective withdrawal date: 31 Dec 2001
Performance specifications as known at time of announcement
- Formatted capacity: 9,100 MB
- Rotational speed: 15,000 rpm
- Average seek time (Read): 4.1 ms
- Data transfer rate (maximum bursting): 160 MB/s
- Average latency: 2.0 ms
- Interface: Ultra160 SCSI
Weight
- 1.6 lbs
- 726 g
- 1.0 inches
- 25.4 mm
- 4.0 inches
- 101.6 mm
- 5.75 inches
- 146.00 mm
- 10 to 35 degrees C (50 to 95 degrees F) at 0 to 914 m (0 to 3,000 ft)
- 10 to 32 degrees C (50 to 90 degrees F) at 914 m to 2,133 (3,000 to 7,000 ft)
- 8% to 80% (non-condensing)
- UL
- CSA
- TUV
- CE Mark
- C-Tick Mark (AS/NZS 3548 Class A)
- IEC
- Taiwan (BSMI Type Certification)
- Korean EMI
- No. The ENERGY STAR emblem does not represent EPA endorsement of any product or service.
Hardware requirements for IBM systems
These HDD options are supported in Ultra2 or Ultra160 modes in the hot-swap drive bays of the following Netfinity products:
- IBM eServer xSeries 220
- IBM eServer xSeries 230
- IBM eServer xSeries 240 (8664)
- IBM eServer xSeries 340
- Netfinity 4500R
- Netfinity 5100
- Netfinity 5600 - Ultra2 only
- Netfinity 6000R
- Netfinity 7100 - Ultra2 only
- Netfinity 7600 - Ultra2 only
- Netfinity 8500R - Ultra2 only
- Netfinity EXP200 - Ultra2 only
- Netfinity EXP300
- These options are supported by the same operating system and application software as the Netfinity server, or EXP storage unit, in which it is installed.
NOTE:
(1) Replaced by part number 19K0656, 18.2GB 15K-rpm Ultra 160 SCSI Hot-Swap HDD.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU00HZX","label":"System x Hardware Options->Hard drive - SCSI (Hot-Swap)->9 GB->19K0655"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-4MJQAL