Product overview - Netfinity 5600

Content

The following information summarizes the features of the Netfinity 5600.

Microprocessor

• Intel Pentium III microprocessor with MMX technology and SIMD extensions
• 32 KB of level-1 cache
• 256 KB of level-2 cache (min.)
• Expandable to two microprocessors

• Standard: 128 MB, expandable to 4 GB
• 133 MHz, registered, error correcting code (ECC), synchronous dynamic random access memory (SDRAM) complying with PC 133 SDRAM Registered DIMM Specification, Revision 1.0 or later).
• Four dual inline memory-module (DIMM) sockets

• Standard: One 3.5-inch, 1.44 MB

• Up to six hot-swappable hard disk drives supported

• Standard: 40X IDE

• Keyboard
• Mouse

• Six slim (1-inch) or three half-high (1.6-inch) hot-swap drive bays
• Three 5.25-inch non-hot-swap bays (one used by CD-ROM drive)

• Three 64-bit hot-plug PCI slots
• Two standard (non-hot-plug) 32-bit PCI slot

• BIOS, diagnostics, and Netfinity Advanced System Management Processor upgrades (when available) can update EEPROMs on the system board

• Door and side cover lock (tower model only)
• Power-on and administrator passwords
• Selectable drive-startup
• Keyboard password
• Systems management security:
  • User log-in password
  • Read-only or read/write access
  • Dial back

• Power supplies
• Fans
• Memory
• Hard disk drives
• Microprocessors
• Voltage regulator modules (VRMs)

• Two universal serial bus (USB) ports
• One parallel port
• Mouse port
• Keyboard port
• Video port
• Advanced System Management Interconnect port
• Two SCSI ports (one internal, one external)
• 10BASE-T/100BASE-TX Ethernet port (controller on system board)
• Redundant Ethernet capability, through the use of an optional network interface card (NIC)
• Netfinity Advanced System Management Processor on system board
• Dedicated Advanced System Management I/O port
• Video controller (with 4 MB video memory) compatible with:
  • Super video graphics array (SVGA)
  • Video graphics adapter (VGA)

• Two 250 W (115230 V ac)
  • Standard - 500 W non-redundant, 250 W redundant
  • Optional - Additional 250 W power supply is available for 500 W redundancy
• Automatic voltage range selection
• Built-in overload and surge protection
• Automatic restart after a loss of power

• Three hot-swap fans

Size (Tower Model)

• Depth: 659.3mm (26 inch)
• Height: 426.5mm (16.8 inch)
• Width: 217.3mm (8.6 inch)

Size (Rack Model)

• Depth: 629.3mm (24.8 inch)
• Height: 217.3mm (8.6 inch) (5 U)
• Width: 426.6mm (16.8 inch)

Weight (Tower Model)

• Minimum configuration: 26.6kg (58.6 lb)
• Maximum configuration: 37.5kg (82.7 lb)

Weight (Rack Model)

• Minimum configuration: 25.3kg (55.7 lb)
• Maximum configuration: 36.2kg (79.8 lb)

Environment

Air temperature

• Server on: 10° to 35° Celsius (50° to 95° Fahrenheit)
• Altitude: 0 to 914m (3000 ft.)
• Server on: 10° to 32° Celsius (50° to 90° Fahrenheit)
• Altitude: 914m (3000 ft.) to 2133 m (7000 ft.)
• Server off: 10° to 43° Celsius (50° to 110° Fahrenheit)
• Maximum Altitude: 2133m (7000 ft.)

Humidity

• Server on: 8% to 80%
• Server off: 8% to 80%

Maximum altitude

• 2133m (7000 ft)

Electrical Input

• Sine wave input (50 to 60Hz) is required
• Input voltage:

Low range

• Minimum: 90 V AC
• Maximum: 137 V AC

High range

• Minimum: 180 V AC
• Maximum: 265 V AC

Input kilovolt-amperes (kVA) approximately

• Minimum configuration as shipped: 0.08 kVA
• Maximum configuration: 0.52 kVA

Power Available for each hot-swap drive bay

• +5 V dc line: 15 A
• +12 V dc line: 17.2 A

Heat Output

Approximate heat output in British Thermal Units (Btu) per hour

• Minimum configuration: 683 Btu (200 watts)
• Maximum configuration: 2048 Btu (600 watts)

Acoustical Noise Emissions Values

• Sound power, idling: 6.6 bel maximum
• Sound power, operating: 6.8 bel maximum
• Sound pressure, operating: 67 dBa maximum