Product Documentation
Abstract
Removing the simple-swap hard drive backplate movie - IBM System x3250 M4 (type 2583)
Content
Text from the audio portion of the simple-swap hard drive backplate removal movie
Removing the simple-swap hard drive backplate
To remove the simple-swap hard drive backplate:
- Remove the top cover:
- Turn off the server and peripheral devices, and disconnect all power cords and external cables.
- Press the cover-release button.
- Slide the cover back approximately one half inch.
- Lift the cover off of the server, and set it aside.
- Pull the hard disk drives out of the server slightly to disengage them from the backplate.
- Make note of where the cables are attached to the backplate; then, disconnect them.
- Lift the backplate out of the server, and set it aside.
For specific instructions for the removal and installation of hardware, see:
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW341","label":"System x->System x3250 M4"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5092637