Installing the operator information panel movie - IBM System x3250 M4 (type 2583)

Content

• Movie player help

Text from the audio portion of the operator information panel installation movie

Installing the operator information panel assembly

To install the operator information panel assembly:

1. Guide the operator information panel assembly into position on top of the DVD drive housing. Make sure that the LEDs and the USB connectors are aligned with the openings in the bezel, and that the screw holes in the operator information panel align with the screw holes in the top of the DVD drive housing.
2. Screw the operator information panel assembly to the DVD drive housing.
3. Connect the signal cable to the operator information panel board.
4. Install the top cover:
   1. Position the cover on top of the server so that approximately one half inch extends from the rear.
   2. Slide the cover toward the front of the server.
   3. Make sure that the cover correctly engages all of the inset tabs on the server.
5. Reconnect the external cables and power cords.

• View operator information panel removal movie
• Return to matrix

For specific instructions for the removal and installation of hardware, see:

• Installation and Service Guide