Product Documentation
Abstract
Memory part numbers for IBM Flex System p260 Compute Node
Content
- See ServerProven for memory compatibility
- See Configuration and Options Guide (COG) for all parts that are configurable with this system
| Description | Marketing part number | Replacement part number | CRU/FRU type |
|---|---|---|---|
| 2 GB DDR3 1066 MHz LP RDIMM w/o HS | 78P1011 | 78P1011 | |
| 4 GB DDR3 1066 MHz VLP RDIMM | 78P0501 | 78P0501 | |
| 8 GB DDR3 1066 MHz VLP RDIMM w/ HS | 78P0502 | 78P0502 | |
| 16 GB DDR3 1066 MHz LP RDIMM w/ HS | 78P0639 | 78P0639 |
Notes:
There are 16 buffered DIMM slots on the p260 for a maximum of 256 GB (16x 16 GB DIMMs).
The memory-placement rules are as follows:
- Install DIMM fillers in unused DIMM slots to ensure proper cooling.
- Install DIMMs in pairs. Both need to be the same size.
- Both DIMMs in a pair must be the same size, speed, type, and technology. You can mix compatible DIMMs from multiple manufacturers.
- Install only supported DIMMs, as described on the IBM ServerProven website:
Storage configuration impact to memory configuration
- If HDDs are chosen, then only very-low-profile (VLP) DIMMs can be used because of internal spacing. There is not enough room for the 2.5-inch drives to be used with low-profile (LP) DIMMs. Verify your memory choice to make sure it is compatible with the local storage configuration.
- The use of SSDs does not have the same limitation, and LP (or VLP) DIMMs can be used with SSDs.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU050","label":"BU NOT IDENTIFIED"},"Product":{"code":"QU91NSI","label":"PureFlex System and Flex System->p260 Compute Node->7895"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5090317