GX++ card removal - 8231-E2B (Power 710, Power 730)

Content

• Movie player help

GX++ card removal

To remove the GX++ card, follow these steps:

1. Remove the service access cover.
2. Identify the part to replace. using one of the following methods.
   
   • Use the service indicator light-emitting diodes (LEDs) to help identify the part.
   • Use the service label located on the underside of the service access cover.
   • NOTE: The GX adapters are located in slots P1-C2 and P1-C8.
3. Disconnect and label any necessary cables with the proper connection information. The labels make it easier to reconnect the cables after you replace the adapter.
4. If applicable, remove any mechanical retaining brackets.
5. Disconnect the power source from the system by unplugging the system.
6. Remove the existing adapter assembly. Unlock the latch above the adapter slot by pulling the latch toward the back of the system.
7. Remove the existing adapter assembly by unlocking the latches on the adapter. Pull up the latches into the open position, and lift the adapter out of the system.

• View GX++ card installation movie
• Return to components list

• Power Hardware Information Center