Product Documentation
Abstract
IBM System x3850 X5, System x3950 X5 - Hot-swap Power Supply Installation Movie
Content
Text from the audio portion of the hot-swap power supply installation movie
To install the Hot-swap Power Supply:
- With the handle in the open position, slide the power supply into the bay.
- Press the orange release latch to the right, and then slide the handle down until latched in the closed position.
- Connect the power cord to the connector on the back of the power supply.
- Use the same procedure to install the second power supply if required.
Here is a closer look at the relationship between the power supply connector and the Handle.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SRF","label":"System x->System x3850 X5->7146"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SRO","label":"System x->System x3850 X5->7145"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SZB","label":"System x->System x3950 X5->7145"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5086292