Product Documentation
Abstract
IBM System x3650 M2, x3650 M3 - Hot-swap hard drive installation movie
Content
Text from the audio portion of the top cover installation movie
To install the top cover:
- With the cover release latch in the open position place the cover over the chassis so that the tabs in the cover align with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch down to the closed position.
Here is a closer look at a tab on the cover and a slot in the side of the chassis.
Here is a closer look at an alignment pin on the cover and a slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WCX","label":"System x->System x3650 M2->7947"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SLL","label":"System x->System x3650 M3->7945"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5085927