Product Documentation
Abstract
IBM System x3400 M2, x3500 M2 - Bezel removal movie
Content
Text from the audio portion of the Bezel removal movie
To remove the Bezel:
- Unlock the side cover if required.
- Position your finger on the depressed area on the left side of the bezel and rotate the bezel away from the server.
- Press down on the light path diagnostic panel release latch and pull the panel partially out of the server so that it is clear of the top hinge.
- Press the retention tabs on the upper hinge assembly toward each other and pull the hinge assembly partially out of the chassis.
- Repeat the procedure for the lower and center hinges and remove the bezel.
Here is a closer look at the tabs on a hinge assembly.
Note: The bezel will also disengage from the hinges if you rotate the bezel beyond 180° or if excessive pressure is applied to the bezel.
The bezel is designed with breakaway hinges so that you can reattach it to the server.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03XIC","label":"System x->System x3400 M2->7836"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU03XIF","label":"System x->System x3400 M2->7837"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03XIH","label":"System x->System x3500 M2->7839"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5085839