Product Documentation
Abstract
IBM System x3550 M2, x3650 M2 - Bezel installation movie
Content
Text from the audio portion of the bezel installation movie
To install the bezel:
- To obtain additional clearance to install the bezel remove any drives or filler panels installed in the top row.
- Insert the tabs on the bottom of the bezel into the slots in the chassis.
- Position the video connector in the bezel then rotate the top of the bezel towards the chassis.
- Install the two hex studs securing the video connector to the bezel.
- Secure the bezel to the chassis with the four screws.
- Install any drives or filler panels that were previously removed.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU03WKC","label":"System x->System x3550 M2->7946"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU04SMA","label":"System x->System x3550 M3->7944"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5082261