Product Documentation
Abstract
Rear fan cage installation movie for the IBM System x3500.
Content
To install the Rear fan cage:
- Align the four retaining tabs with the slots in the chassis, then slide the cage to the right until the retaining pin locks into place.
- Connect the fan cable to the system board.
Install the Rear Fan Air Baffle:
- Flex the side of the baffle to fit over the hinge pins at the cutout.
- Slide the baffle down into place.
Install the Left-side Cover:
- Position the channel on the cover over the rail on the bottom edge of the chassis.
- Rotate the cover closed, ensuring the latch secures it in place.
- Lock the side cover, if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW317","label":"System x->System x3500"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075157