Product Documentation
Abstract
Hot-swap disk drive installation movie for the IBM System x3500.
Content
To install a Hot-swap disk drive:
- Ensure the tray handle is in the open position; then, position the drive assembly in the bay using the guide rails for alignment.
- Carefully slide the drive into the bay until the drive connects with the backplane.
- Rotate the drive tray handle to the closed position.
Install the Bezel:
- Insert the hinge tabs on the right side of the bezel into the slots on the server chassis; then, rotate the bezel until secured by the three latches.
Here's a closer look at a hinge tab.
Install the Left-side Cover:
- Position the channel on the cover over the rail on the bottom edge of the chassis.
- Rotate the cover closed, ensuring the latch secures it in place.
- Lock the side cover, if required.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW317","label":"System x->System x3500"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5075119