Product Documentation
Abstract
IBM System x3550 (Type 1013, 1913, 7978) - DIMM removal movie
Content
To remove the DIMM:
- Turn off the server and all peripheral devices and disconnect all power cords and external cables.
Remove the Top Cover:
- Slide the cover release latches and rotate the Fan Door open.
- Loosen the captive screw on the rear of the chassis.
- Slide the cover towards the rear of the server approximately one half inch and then lift the cover off the server and set it aside.
Remove the DIMM:
- Push out on the two latches and lift the DIMM out of the socket.
- Place it on the ESD protected surface.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU02DKY","label":"System x->System x3550->1913"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU02QYU","label":"System x->System x3550->1013"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QUOEF4I","label":"System x->System x3550->7978"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5074590