Product Documentation
Abstract
IBM System x3455 memory installation movie.
Content
Text from the audio portion of the memory installation movie
To install a DIMM
- Ensure that the retention latches are open and insert the DIMM straight into the socket, pressing down on both corners of the DIMM at the same time until secured by the latches.
- Use the same procedure to install any additional DIMMs
Install the top cover:
- Position the cover over the chassis aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward, ensuring that the channel in the front of the cover engages edge on the chassis, and secure with the single captive screw.
- Here is a closer look at a slot in the chassis and a tab on the cover.
- Here is a closer look at the channel on the front of the cover.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW322","label":"System x->System x3455"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071899