Product Documentation
Abstract
IBM System x3755 - RSA SlimLine adapter II installation movie
Content
Text from the audio portion of the RSA SlimLine adapter II installation movie
To install the RSA SlimLine adapter II:
-
Carefully grasp the adapter by its top edge or upper corners, and align it with the connector and press firmly until seated.
Note: On production level servers there will be a guide that secures the adapter in place.
Install the top cover:
-
Position the cover over the chassis, aligning the tabs in the cover with the slots in the chassis.
-
Slide the cover forward while rotating the cover release latch down to the closed position.
Here's a closer look at a cover tab and a slot in the chassis.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW324","label":"System x->System x3755"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071791