IBM Support

CD/DVD media backplane removal movie - IBM System x3755

Product Documentation


Abstract

IBM System x3755 - CD/DVD media backplane removal movie

Content

Text from the audio portion of the CD/DVD media backplane removal movie

To remove the CD/DVD media backplane:

Turn off the server and all peripheral devices, and disconnect all power cords and external cables.

Remove the top cover:

  1. Rotate the top cover release latch up and slide the cover approximately one-half inch to the rear.
  2. Lift the cover off and place it aside.

Remove the CD-RW/DVD drive:

  1. Push the blue retention latch forward and slide the drive out of the drive bay.

Remove the CD/DVD media backplane:

  1. Disconnect the DVD drive power and signal cables from the backplane.
  2. Remove the two screws that secure the media backplane to the chassis and lift the media backplane out of the server.

    Note: Holding the DVD drive latch forward will provide easier access to the front screw and backplane.


For specific instructions for the removal and installation of hardware.

Document Location

Worldwide

Operating System

System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW324","label":"System x->System x3755"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-5071757

Page Feedback