Product Documentation
Abstract
IBM System x3655 - Front video cable installation movie
Content
Text from the audio portion of the front video cable installation movie
To install a front video cable
- Place the video connector in the cutout in the front bezel and secure with the two hex studs.
- Connect the cable to the system board.
Install the fan bracket assembly:
- Using the guides on the assembly and the slots in the chassis for alignment lower the fan-bracket assembly into the chassis.
- Push the fan-bracket-assembly levers toward the rear of the server until they stop then pinch the release latches and metal tabs together and push the levers down into place.
- Press down on the metal tabs and the fans to be sure the fan-bracket assembly is fully seated.
Install the top cover:
- Position the cover over the chassis, aligning the tabs in the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch down to the closed position.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW323","label":"System x->System x3655"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-5071705