Product Documentation
Abstract
Instructions for removing the media-interposer card from any xSeries 366 and xSeries 460 server.
Content
Text from the audio portion of the media-interposer card removal movie
To remove the media-interposer card:
- Turn off the server and peripheral devices, and disconnect the power cords.
Remove the top cover:
- Lift the cover-release latch handle.
- Slide the cover to the rear, approximately one-half inch.
- Lift the cover off the server.
Remove the DVD drive:
- Press the release latch, grasp the drive, and slide it out of the front of the server.
- Disconnect the DVD drive power and signal cables from the media-interposer card.
- Remove the two screws, and lift the card out of the server.
Note: It may be necessary to move the DVD release latch forward to gain access to the bottom screw.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Y","label":"Older System x->xSeries 366"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW21J","label":"Older System x->xSeries 460"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-63152