Product Documentation
Abstract
Instructions for installing the hot-swap power supply in any xSeries 366 and xSeries 460 server.
Content
Text from the audio portion of the hot-swap power supply installation movie
To install a hot-swap power supply:
With the power supply handle up, insert the power supply. Seat the connector by rotating the handle down, and ensure the release latch engages. Then, connect the power cord.
Note: When the power supply is operational, both the AC and DC LEDs will be lit.
Install the top cover:
- Position the cover on the chassis while aligning the tabs on the cover with the slots in the chassis.
- Slide the cover toward the front of the system, and secure it with the cover-release latch handle.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20Y","label":"Older System x->xSeries 366"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW21J","label":"Older System x->xSeries 460"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-62925