Product Documentation
Abstract
Service parts listing for the IBM eServer xSeries 260.
Content
Notes:
- This parts listing supports the IBM eServer xSeries 260.
- If your specific model is not listed, please use the Quick path feature on the right-nav, and refer to the product description. Look for the "Based on" model.
- Field Replacement Units (FRU) that are identified in the CRU column by 1 or 2 are Customer Replaceable Units.
-
Each FRU is available for all types or model, unless specific types or models are specified.
-
A CRU (Customer Replaceable Units) is identified 1 or 2 in the CRU ID column. 1 means that the part is a Tier 1 CRU; 2 means that the part is a Tier 2 CRU. An N in the CRU ID column means that the part is not a CRU.
- Tier 1 CRU:
- No tools required.
- A coin or a thumb screw is acceptable.
- Minimal technical expertise is required.
- Minimal problem determination is required-less than five minutes.
- Tier 2 CRU:
- Up to 4 screws or fasteners have to be removed.
- Some technical experience is required.
- IBM Support Center assistance may be used.
- Problem determination can be done by customer, either on site or with IBM Support Center assistance.
- Tier 1 CRU:
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW21H","label":"Older System x->xSeries 260"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-60844