IBM Support

Memory DIMM removal movie - IBM eServer xSeries 306

Product Documentation


Abstract

Procedures for removing the DIMM memory on the xSeries 306 server.

Content

Text from the audio portion of removing the DIMM memory movie

To remove the DIMM:

  1. Remove the cover:
    1. Turn off the server and all attached peripheral devices.
    2. Disconnect all power cords and all external signal cables.
    3. Loosen the captive screw on the rear of the server, then slide the cover to the rear and lift it off.
  2. Remove the memory module:
    1. Push out on the two latches, lift the memory module out of the socket, and place it on a static protected surface.

For specific instructions for the removal and installation of hardware.

 

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20K","label":"Older System x->xSeries 306"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-55240