Product Documentation
Abstract
Procedures for installing the bezel on the xSeries 206 server.
Content
Text from the audio portion of installing the bezel movie
To install the bezel:
- Insert the two tabs on the bottom of the bezel into the matching loops in the server chassis.
- Push the top of the bezel toward the server until the two tabs at the top of the bezel lock into place. Here is a closer look at the bottom loop of the bezel. Here is a closer look at the alignment tab.
Install the side cover:
- Position the cover over the chassis and align the tabs on the cover with the slots in the chassis.
- Slide the cover forward while rotating the cover release latch to the closed position. Here is a closer look at the cover tab and a slot in the chassis.
Install the front door:
- Align the door pins with the hinge latches and press into place. Here is a closer look at the front door hinges
For specific instructions for the removal and installation of hardware
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20J","label":"xSeries 206"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-55069