Product Documentation
Abstract
Procedures for installing the CD-ROM drive from the xSeries 365 server.
Content
Text from the audio portion of the installing the CD-ROM drive movie
To install the CD-ROM drive:
- Slide the replacement drive into the bay.
- Push each end of the wire spring through the hole in the drive guide and into the hole in the drive; then, push the middle of the wire spring under the retention hook.
To install the top cover:
- Position the cover on the chassis while aligning the tabs on the cover with the slots in the chassis.
- Slide the cover toward the front of the system, and secure it with the cover-release latch handle.
Here's a closer look at a cover tab and a slot on the chassis. .
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20E","label":"Older System x->xSeries 365"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-54165