Product Documentation
Abstract
Procedures for removing the memory DIMM from the xSeries 365 server.
Content
Note: The memory door was removed post-announcement, so your server may differ slightly from the video
Text from the audio portion of the removing the memory DIMM movie
To remove the top cover:
- Lift the cover-release latch handle. The cover slides to the rear approximately one-half inch.
- Lift the cover off the server.
To remove a DIMM:
- Pull back on the memory cover latch and swing the cover open.
- Loosen the latches on each end of the DIMM and lift the DIMM out.
For specific instructions for the removal and installation of hardware.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20E","label":"Older System x->xSeries 365"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-54154