Product Documentation
Abstract
Procedures for installing the Baseboard Management Controller from the eServer 325.
Content
Text from the audio portion of the installing the Baseboard Management Controller movie
To install the Baseboard Management Controller card:
- Turn the card so that the slot aligns correctly with the key on the connector on the system board, then insert and seat the card into the connector on the system board
- Rotate the card down and onto the plastic standoffs.
- Ensure the two retaining clips secure the card to the system board.Here’s a closer look at the alignment key on the baseboard management controller card.
To install the cover:
Position the cover on the chassis, and close the latch.
- View the Baseboard Management Controller removal movie
- View detailed installation and removal instructions for the eServer 325
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20C","label":"Older System x->eServer 325"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
23 January 2019
UID
ibm1MIGR-53854