Product Documentation
Abstract
This document contains a table entitled IBM 3600 LTO Tape Library - Exploded views
Content
The exploded views are categorized into the following sections. Move the mouse over the part for a description of the part.
Click here to review systems part listing for IBM 3600 LTO Tape Library
Front and back replacement part numbers (FRUs)
These parts are accessed from the front or back of the library
| Index | Description |
|---|---|
| Vacant drive module cover | |
| Standard power supply | |
| Redundant power supply | |
| Tape drive module | |
| Online drive repair SCSI loop cable (included in cable kit) | |
| Slave controller for all models, except Model 2/20 | |
| Vacant card slot cover | |
| Remote management card assembly | |
| Library controller | |
| Fibre Channel board | |
| RFI front panel display shield | |
| Front panel display | |
| Quartz gray display window frame and viewing window | |
| Quartz gray viewing window assembly | |
| RFI viewing window shield | |
| Fibre Channel GBIC. Only used on standard performance Fibre Channel boards. | |
| External daisy-chain cable | |
| Fibre Channel cable | |
| SCSI terminator | |
| SCSI interface cable |
Cosmetic and sheetmetal replacement part numbers (FRUs)
These parts are accessed on the outside of the library
| Index | Description |
|---|---|
| Transport assembly | |
| Library side panel for models 2/20, 4/40 (left back, when viewing from the front of the library) | |
| Library side panel for models 2/20, 4/40, and 6/60 (left front, when viewing from the front of the library) | |
| Empty magazine | |
| Left door tray assembly | |
| Left and right cosmetic door | |
| Right door tray assembly | |
| Bottom cover | |
| Library side panel for Models 2/20, 4/40, and 6/60 (right front, when viewing from the front of the library) | |
| Library side panel for Models 2/20, 4/40, and 6/60 (right back, when viewing from the front of the library). |
| Index | Description |
|---|---|
| Library top cover for model 2/20 | |
| Bezel chin for the lowest library level | |
| Forehead for library model 4/40 | |
| Bezel chin | |
| Forehead for library models 6/60 and 12/140 | |
| Lifting strap (used to guide libraries into a rack) | |
| Lifting strap (used to guide libraries into a rack) | |
| Vertical lift cover for multi-level libraries | |
| Standalone feet | |
| Standalone feet |
Internal replacement part numbers (FRUs)
This exploded view illustrates parts that are found inside the library.
| Index | Description |
|---|---|
| Back gear rail without stop for multi-level libraries. Install this part by removing all drives and installing the rails from the back of the library. | |
| Front gear rail without stop for multi-level libraries. Install this part by removing the viewing window from the front of the library. | |
| Back gear rail with stop (packaged with front and upper gear rails and accessed by removing the drives). | |
| Front gear rail with stop (packaged with back and upper gear rails and accessed by removing the front viewing window). | |
| Left magazine lock assembly. Includes the door tray detecting switch. Access this part by removing the panels on the left side of the library. | |
| Right magazine lock assembly. Includes the door tray detecting switch Access this part by removing the panels on the right side of the library. | |
| Vertical lift assembly |
| Index | Description |
|---|---|
| Display cable (included in cable kit). Access this part by removing the library side panels. The display cable needs to be threaded underneath the right door tray rail to connect to the motherboard. Do not connect the display cable on all levels; only connect the cable located on the level with the display. | |
| Power switch cable (included in cable kit). Access this part by removing the chin plate on the front and at the bottom of the library and the right side panel on the lowest library level. | |
| Mailslot solenoid assembly. Access this part by removing the library side panels. | |
| Magazine lock harness cable (included in cable kit). Access this part by removing the library side panels. Secure the cable to the side of the library chassis to ensure it does notg et damaged. | |
| Interconnect cable that connects multi-level libraries | |
| Chassis fan. Remove all cards from the back of the library. | |
| Motherboard. |
Model 12/140 replacement part numbers (FRUs)
This exploded view shows parts that are unique to this larger library.
| Index | Description |
|---|---|
| Top panel. | |
| Filler panel. | |
| Side panels. | |
| Library expansion card, which is located only on level 5 of the library. | |
| Front and back side panels on library. | |
| Lift cover bottom panel. | |
| Lift assembly with jack and handwheel. | |
| Power distribution unit. |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"QU01UKG","label":"System x Hardware Options->Tape Library->Tape Library 3600"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU054","label":"Systems w\/TPS"},"Product":{"code":"QU01YKW","label":"System x Hardware Options->Tape Autoloader->Tape Autoloader 3600"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-53090