Product Documentation
Abstract
Movie demonstrating the removal and installation of the HS20 Blade with SCSI storage expansion unit.
Content
Text from the audio portion of the HS2 Blade Server with SCSI Expansion Storage Option removal and installation movie
To remove an HS20 Blade Server with SCSI Expansion Storage Option:
- Shut down the operating system and then power off the blade.
- Squeeze the latches to release the handles, then rotate the handles simultaneously to the open position and slide the Blade out of the BladeCenter.
NOTE: Wait 30 seconds for the disk drive to spin down before removing.
To install an HS20 Blade Server with SCSI Expansion Storage Option in the BladeCenter:
- Slide the Blade into the BladeCenter and then close the handles simultaneously until the latches secure it.
- View detailed installation and removal instructions for the IBM eServer BladeCenter (Type 8677)
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW20T","label":"BladeCenter E Chassis"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-52668