Product Documentation
Abstract
Floppy diskette drive removal and installation movie for the IBM eServer xSeries 235
Content
Text description of floppy diskette drive removal
Press in on the two latches to release the drive and then slide the diskette drive out of the drive bay. Disconnect the signal and power cables. To remove a rail, pull out on the rail to release the spring retainer, and then lift it off. Use the same procedure to remove the other rail.
Text description of floppy diskette drive installation
Position the rail and spring retainer over the holes in the device and press the spring retainer to secure. Connect the power and signal cables. Slide the diskette drive into the drive bay until it is secured with the two latches.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19P","label":"Older System x->xSeries 235"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-52008