IBM Support

VRM removal and installation movie - IBM eServer xSeries 235

Product Documentation


Abstract

VRM removal and installation movie for the IBM eServer xSeries 235

Content

Text description of VRM removal

Open the cover on the air baffle assembly. Grasp the T-handle and lift up to release the VRM latches and lift the VRM up and out of the system. To remove the VRM handle, spread the latches and remove the VRM card. To install the VRM in the handle, slide the VRM into the corner cardholders and secure the VRM with the latches.

Text description of VRM installation

Grasp the T-handle on the VRM; align the notch on the VRM with the tab on the connector. Press down on the VRM until the VRM is seated in the connector and secured with the two latches. Close the cover on the air baffle assembly. Here's a closer look the notch on the VRM.

Document Location

Worldwide

Operating System

Older System x:Operating system independent / None

[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19P","label":"Older System x->xSeries 235"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]

Document Information

Modified date:
24 January 2019

UID

ibm1MIGR-52000

Page Feedback