Product Documentation
Abstract
IBM eServer xSeries 450 Front bezel removal and installation movie
Content
 |
Text description of front bezel removal
To remove the front bezel:
- Press in the two bottom tabs at opposite edges of the bezel and rotate the bottom edge slightly away from the server.
- Press in the two top tabs on the sides of the bezel and pull it away from the server.
- Push in on the two tabs at the bottom edge of the bezel and pull it off the server.
To install the front bezel:
- Align the four tabs on the bezel with the slots in the chassis and insert the bezel.
- Press firmly against the front of the bezel until it snaps into place.
- Here is a closer look at the bezel latching tabs.
For specific instructions for the removal and installation of hardware.
 |
Problem Determination and Service Guide |
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW19W","label":"Older System x->xSeries 450"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-50834