Product Documentation
Abstract
The SCSI backplane supports up to two hard disk drives. NOTE: All drives must be removed and disconnected before removing the backplane. Remove any connected drives. Remove all connectors from the SCSI backplane.
Content
The SCSI backplane supports up to two hard disk drives.
Note: All drives must be removed and disconnected before removing the backplane.
- Remove any connected drives.
- Remove all connectors from the SCSI backplane.
- Remove the five screws (1) that hold the backplane to the server chassis.
- Lift the SCSI backplane (2) up and out of the server. You may need to tilt the SCSI backplane slightly to get it out of the server.
- Reverse the procedure to install the SCSI backplane.
Document Location
Worldwide
[{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HW18W","label":"Older System x->xSeries 370"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}},{"Type":"HW","Business Unit":{"code":"BU016","label":"Multiple Vendor Support"},"Product":{"code":"HWN07","label":"Older System x->Netfinity 8500R"},"Platform":[{"code":"PF025","label":"Platform Independent"}],"Line of Business":{"code":"","label":""}}]
Was this topic helpful?
Document Information
Modified date:
24 January 2019
UID
ibm1MIGR-45643