Security Bulletin: security vulnerabilities are addressed with IBM Business Automation Insights iFixes for October 2026.

Vulnerability Details

CVEID:   CVE-2026-90711
DESCRIPTION:   proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.
CWE:   CWE-290: Authentication Bypass by Spoofing
CVSS Source:   openjs
CVSS Base score:   9.1
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N)

CVEID:   CVE-2026-19032
DESCRIPTION:   jackson-databind's deserializer for java.nio.file.Path resolves an attacker-supplied URI without restricting the URI scheme. In JDKFromStringDeserializer.NioPathHelper.deserialize, a string bound from untrusted JSON is passed to new URI(value) and then to Path.of(uri). When that throws FileSystemNotFoundException, the code enumerates ServiceLoaderFileSystemProvider and calls provider.getPath(uri) on the first provider whose scheme matches the attacker-chosen scheme. Untrusted JSON can therefore select and drive an arbitrary registered FileSystemProvider during readValue under a default JsonMapper, and forces provider class loading at the same time. With only the JDK built-in providers (file, jar/zipfs) present, the resolved path is inert and no mount or network I/O occurs; further impact requires a side-effecting third-party FileSystemProvider on the classpath. This affects com.fasterxml.jackson.core:jackson-databind from 2.8.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2. Binding java.nio.file.Path from untrusted JSON should be avoided regardless of version.
CWE:   CWE-470: Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection')
CVSS Source:   HeroDevs
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-10841
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 are vulnerable to HTTP request smuggling.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   IBM
CVSS Base score:   4.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-11548
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 are affected by an HTTP request smuggling vulnerability.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   IBM
CVSS Base score:   4.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-11549
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 are affected by a virtual host bypass vulnerability.
CWE:   CWE-284: Improper Access Control
CVSS Source:   IBM
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-11722
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 are affected by an HTTP request smuggling vulnerability.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   IBM
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-15396
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 are vulnerable to HTTP request smuggling, caused by improper parsing of the HTTP transfer-encoding request header. By sending a specially crafted HTTP transfer-encoding request header, an attacker could exploit this vulnerability to poison the web cache, bypass web application firewall protection, and conduct XSS attacks.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   IBM
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-15412
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8  could allow a remote attacker to conduct phishing attacks, using an open redirect attack. By persuading a victim to visit a specially crafted Web site, a remote attacker could exploit this vulnerability to spoof the URL displayed to redirect a user to a malicious Web site that would appear to be trusted. This could allow the attacker to obtain highly sensitive information or conduct further attacks against the victim.
CWE:   CWE-601: URL Redirection to Untrusted Site ('Open Redirect')
CVSS Source:   IBM
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-15634
DESCRIPTION:   IBM WebSphere Application Server 8.5 and 9.0, and IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 are vulnerable to HTTP request smuggling, caused by improper parsing of the HTTP transfer-encoding request header. By sending a specially crafted HTTP transfer-encoding request header, an attacker could exploit this vulnerability to poison the web cache, bypass web application firewall protection, and conduct XSS attacks.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   IBM
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-75899
DESCRIPTION:   fast-uri is a URI parser for Node.js. It decodes percent escapes in a hostname during parsing and then decodes the parsed hostname a second time during authority recomposition, so a single call to normalize or resolve can turn nested percent-encoded input into a different network destination such as a loopback hostname or address. For example, a doubly encoded host that spells out a loopback name decodes to that live host in one operation, which contradicts RFC 3986 section 2.4 that an implementation must not decode the same string more than once. An application that normalizes or resolves an untrusted HTTP-family URI before outbound routing, redirect validation, or a host-policy check can receive a destination different from the one the original encoded host represented, giving a server-side request forgery and host-policy bypass primitive. This is an incomplete-fix variant of CVE-2026-6322. The affected versions are 2.4.1 up to but not including 2.4.5, 3.1.2 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which normalize percent escapes once and preserve encoded percent signs. Users should upgrade to a patched version.
CWE:   CWE-174: Double Decoding of the Same Data
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-75931
DESCRIPTION:   fast-uri is a URI parser for Node.js. It canonicalizes a host to its ASCII form only when the input carries an explicit scheme, so a scheme-relative reference such as a host preceded by two slashes is returned with its host verbatim and no error set. As a result fast-uri's own entry points disagree with each other: parse, resolve, normalize, and equal can yield different hosts for the same input depending only on whether a scheme is written out, and equal can return opposite verdicts for the same pair of hosts. An application that extracts a host with fast-uri to check it against a policy list and then resolves the same reference can make its decision on one host while the destination is another, enabling host confusion and policy bypass. The affected versions are 2.4.2 up to but not including 2.4.5, 3.1.3 up to but not including 3.1.6, and 4.0.1 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which canonicalize the host consistently across the resolve path. Users should upgrade to a patched version.
CWE:   CWE-436: Interpretation Conflict
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-75975
DESCRIPTION:   fast-uri is a URI parser for Node.js. Its custom parser for bracketed IPv6 literals does not validate the complete IPv6 grammar, so invalid trailing text in an authority can be silently discarded and a malformed attacker-controlled host is turned into a different valid IPv6 destination. For example, a bracketed literal with invalid trailing characters is normalized to the unspecified address, which a Node HTTP client then connects to a local service over loopback, and other malformed literals collapse to private-range addresses. No error is set on the parsed result, so an application checking the error field cannot detect the rewrite. An application that normalizes untrusted URLs before outbound requests, redirects, proxy routing, or address-policy enforcement can be redirected to a local or private IPv6 target, giving a server-side request forgery and address-policy bypass primitive. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which validate bracketed IP literals against the full grammar and mark malformed literals as authority errors. Users should upgrade to a patched version.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-76172
DESCRIPTION:   fast-uri is a URI parser for Node.js. During parsing it runs a legacy decoding pass over the scheme component and never re-escapes the result, and serialization writes the scheme back out verbatim, unlike the host component which is re-escaped. As a result an input whose scheme carries percent-encoded slashes parses as a scheme with no authority, so the parsed host and error are both undefined, yet resolving or normalizing that same input emits a network-path reference whose authority is attacker-chosen and re-parses to that host. An application that allowlists on the parsed host, or treats a reference with no authority as safe to resolve against its base, gets the opposite of what it checked, giving an off-site redirect, server-side request forgery, or address-policy bypass. The legacy decoder also expands non-standard escape forms, widening the issue past upstream filters, and control characters in the scheme can reach the output as raw carriage return and line feed. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which reject a scheme that is not valid after decoding. Users should upgrade to a patched version.
CWE:   CWE-177: Improper Handling of URL Encoding (Hex Encoding)
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-66142
DESCRIPTION:   Apache Neethi is vulnerable to uncontrolled recursion when parsing policies that lack policy Ids or with deeply nested structures, which may lead to a denial of service attack when parsing policies due to runtime memory exhaustion. Users are recommended to upgrade to version 3.2.3, which fixes this issue.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-66143
DESCRIPTION:   It is possible to bypass the maximum number of normalized policy alternatives that was introduced in Apache Neethi 3.2.2 via certain crafted policies, which may lead to a denial of service attack via resource consumption. Users are recommended to upgrade to version 3.2.3, which fixes this issue.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-66144
DESCRIPTION:   Although remote policy references are not retrieved during policy normalization, if they are manually retrieved via the API it can cause a denial of service attack if a huge policy is retrieved. Users are recommended to upgrade to version 3.2.3, which fixes this issue by imposing a default maximum size on data read from remote policy references.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-88932
DESCRIPTION:   multer is a Node.js middleware for handling multipart/form-data uploads. In versions 2.2.0 through 2.3.0, when a request using disk storage is aborted mid-upload, file writes that complete after multer has already run its abort cleanup are not removed, so each aborted upload can leave an orphaned file on disk. A remote unauthenticated attacker can repeatedly start and abort uploads to accumulate orphaned files and exhaust disk space, causing a denial of service. The issue is fixed in multer 2.4.0, and users should upgrade to 2.4.0 or later.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-86472
DESCRIPTION:   fast-uri is a dependency-free RFC 3986 URI parser for Node.js, used by Fastify and ajv. In versions before 2.4.7, from 3.0.0 through 3.1.7, and from 4.0.0 through 4.1.4, fast-uri folds the host to lowercase before it percent-decodes the host, so a percent-encoded uppercase octet such as %41 decodes to a literal A that is never folded. For a scheme-relative reference such as //host there is no scheme, so the host canonicalization that would normally repair this does not run, and parse, normalize, and equal then disagree on the same host. An application that makes a case-sensitive host decision on fast-uri output, for example a host allowlist or denylist that compares the parsed host or uses equal, can be steered past the check with a percent-encoded uppercase octet, and because hostnames are case-insensitive in DNS and HTTP the evading spelling still reaches the host the check meant to gate. The issue is fixed in fast-uri 2.4.7, 3.1.8, and 4.1.5, and users should upgrade to one of those versions or later. As a workaround, compare hosts case-insensitively by lowercasing the parsed host before any allowlist or denylist decision.
CWE:   CWE-178: Improper Handling of Case Sensitivity
CVSS Source:   openjs
CVSS Base score:   4.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-77037
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. In version 2.2.0, when a disk-backed upload is aborted or truncated before the write stream finishes, multer's disk storage engine removes the visible file but does not close the underlying write file descriptor, leaving a deleted but still open descriptor. A remote attacker able to reach an upload route using the built-in disk storage can send repeated aborted or malformed multipart uploads, each one leaking a file descriptor and retaining disk blocks until the process exits, which can exhaust resources and cause a denial of service. The issue is fixed in multer 2.3.0, which closes the destination write stream on abnormal source termination and defers cleanup until the stream has closed. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-77063
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. When an application uses an asynchronous fileFilter together with the fileSize limit, a race condition in multer's file stream handling can allow a file that exceeds the configured size limit to bypass the size-limit rejection. All versions before 2.3.0 are affected. The impact is limited because the underlying multipart parser still truncates the stream at the size limit, so this is a bypass of the limit rejection rather than uncontrolled resource consumption. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')
CVSS Source:   openjs
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N)

CVEID:   CVE-2026-77078
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. A small multipart request containing two specially crafted text field names can cause an uncaught RangeError (Invalid array length) that terminates the Node.js process. The first field uses a very large numeric array index to allocate a maximum-length sparse array, and a second field then pushes past that length, which throws inside the append-field dependency and is not caught by multer. All versions before 2.3.0 are affected, and the issue is a remotely triggerable denial of service. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-82333
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. A small multipart request with two specially crafted text field names can make multer's field parser synchronously iterate a maximum-length sparse array, blocking the event loop so the process cannot handle other requests. A large numeric array index in the first field allocates a maximum-length sparse array, and a second field with a non-numeric key then triggers a full-length iteration inside the append-field dependency. All versions before 2.3.0 are affected, and this is a remotely triggerable denial of service. multer 2.3.0 adds an opt-in fieldArrayIndexLimit option that rejects oversized array indexes. Upgrade to multer 2.3.0 and set limits.fieldArrayIndexLimit to the largest array index your application needs to remediate.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-84375
DESCRIPTION:   js-yaml is a JavaScript YAML parser and dumper. From 3.0.0 until 3.15.2, 4.3.2, and 5.4.1, maxTotalMergeKeys in lib/js-yaml/loader.js and lib/loader.js does not count empty mapping sources while processing the merge key . An attacker can alias a large sequence of empty mappings into many merge targets, causing O(N * K) processing while totalMergeKeys remains unchanged and the configured resource limit is never reached. A relatively small YAML document can therefore cause prolonged CPU consumption in applications that parse untrusted YAML, and merge processing is enabled by default on these release lines. In v3 & v4, merge is enabled by default so the severity score is higher. This issue is fixed in versions 3.15.2, 4.3.2, and 5.4.1.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   security-advisories@github.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-82417
DESCRIPTION:   ### Summary `qs.stringify` throws a `TypeError` when it serializes an object whose own `constructor` property has a truthy, non-callable `isBuffer` member. `utils.isBuffer` duck-types buffers by calling `obj.constructor.isBuffer(obj)` after checking only that the property is truthy, so a value such as `{ constructor: { isBuffer: "x" } }` makes the call throw `TypeError: obj.constructor.isBuffer is not a function`. ### Details `lib/stringify.js:127` calls `utils.isBuffer` on every non-primitive value it serializes. `utils.isBuffer` (`lib/utils.js:332`) reads `obj.constructor.isBuffer` and invokes it without verifying that it is a function. `constructor` and `isBuffer` are ordinary property names, so any object carrying them as own properties reaches the unchecked call. Such an object can be built from untrusted input. `qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })` or `{ allowPrototypes: true }` keeps the `constructor` key as an own property (the default parse options drop it), and `JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")` produces the same shape with no qs option involved. Express 4 with its default `query parser` setting and body-parser with `extended: true` both call `qs.parse` with `allowPrototypes: true`, so on those stacks `req.query` and `req.body` can carry the shape directly. #### PoC ```js var qs = require("qs"); qs.stringify(qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })); qs.stringify(JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")); // TypeError: obj.constructor.isBuffer is not a function // at Object.isBuffer (lib/utils.js:332:78) // at stringify (lib/stringify.js:127:45) ``` #### Fix `lib/utils.js`, applied in e83d321 on `main` and released as v6.16.0: ```diff - return !!(obj.constructor && obj.constructor.isBuffer && obj.constructor.isBuffer(obj)); + return !!(obj.constructor && typeof obj.constructor.isBuffer === "function" && obj.constructor.isBuffer(obj)); ``` Real `Buffer`, `safer-buffer`, and browserify `buffer` polyfill instances serialize exactly as before; only the throw is removed. ### Affected versions `=2.2.5 6.16.0`, fixed in v6.16.0. The unguarded duck-type was introduced in 3768a75 and first shipped in v2.2.5 (September 2014). v2.2.4 and earlier used `Buffer.isBuffer` and are not affected. Every release from v2.2.5 through v6.15.3 contains the unguarded call. ### Impact An unauthenticated request can make any code path that re-serializes attacker-influenced data with `qs.stringify` (for example, rebuilding a query string from `req.query` for a redirect or an upstream request, or serializing a parsed JSON body) throw synchronously. In a typical Node.js HTTP framework the throw is caught by the framework error boundary and the affected request returns a 500; the process survives and other requests are unaffected. Where the call runs outside an error boundary, such as an `async` Express 4 handler (where the throw becomes an unhandled promise rejection) or a background job, the process exits, so the impact in that case depends on the application error handling rather than on qs.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   harborist
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-82562
DESCRIPTION:   ### Summary When `qs.parse` is called with `comma: true` and `throwOnLimitExceeded: true`, a comma-separated value under a bracket-push key (`a[]=1,2,3,4`) is split into an array without being compared against `arrayLimit`, while the same value under a flat key (`a=1,2,3,4`), an indexed key (`a[0]=`), a nested key (`a[b]=`), or a dotted key (`a.b=` with `allowDots`) throws the documented `RangeError`. A single parameter such as `a[]=1,2,2,...` therefore produces an inner array of arbitrary length even though the caller opted into the hard limit. This is the `[]=` key form that the fix for CVE-2026-2391 (qs 6.14.2) did not cover. ### Details In `lib/parse.js`, a comma-separated value under a `[]=` key is split and then wrapped as a single nested element (`val = [val]`, so that each `a[]=x,y` group counts as one element of the outer array). The `arrayLimit` check that 6.14.2 added for comma values runs after that wrap, so for `[]=` parts it only ever saw the wrapper of length 1. 6.15.3 added a pre-split comma count so that an oversized value throws before it is allocated, but gated it on an `isFlatArrayValue` flag that `parseValues` set to `false` for any part containing `[]=`, and did not pass it for object-valued input, so the gap remained. #### PoC ```js var qs = require('qs'); var options = { comma: true, arrayLimit: 3, throwOnLimitExceeded: true }; qs.parse('a=1,2,3,4', options); // RangeError: Array limit exceeded. Only 3 elements allowed in an array. qs.parse('a[]=1,2,3,4', options); // { a: [ [ '1', '2', '3', '4' ] ] } (no throw) qs.parse('a[]=' + '1,'.repeat(1000000) + '1', { comma: true, arrayLimit: 20, throwOnLimitExceeded: true }); // no throw; a 1,000,001-element inner array is allocated ``` #### Fix `lib/parse.js`, applied in 8859c37 on `main` and released as v6.16.0: the `isFlatArrayValue` gate is removed, so every comma-split value is counted against `arrayLimit` before splitting regardless of key form. An in-limit group under `a[]=` still counts as one element of the outer array, and the default (`throwOnLimitExceeded: false`) path is unchanged. ### Affected versions `=6.14.2 6.16.0`, fixed in v6.16.0. v6.14.2 introduced `arrayLimit` enforcement for comma values (the fix for CVE-2026-2391) but only for values not under a `[]=` key, and every release from v6.14.2 through v6.15.3 has the same gap. v6.14.0 and v6.14.1, where `throwOnLimitExceeded` exists but does not apply to any comma form, are covered by CVE-2026-2391 rather than this record. Earlier lines (6.7.x through 6.13.x) have `comma` but no `throwOnLimitExceeded`, so there is no hard cap on any comma path to bypass; releases before 6.7.0 have no `comma` option. ### Impact An unauthenticated attacker who can reach an application that parses untrusted query strings or urlencoded bodies with both `comma: true` and `throwOnLimitExceeded: true` (both non-default) can bypass the configured limit with a single `a[]=` parameter and force the parser to allocate an array proportional to the request size. The cost is strictly linear in the attacker-supplied bytes (about 0.1 microseconds and 6 to 7 retained bytes per input byte; the same out-of-memory threshold as the documented default `throwOnLimitExceeded: false` path), so a transport-layer request or body size limit bounds it completely (and node's default maximum HTTP header size of 16 KB already bounds the request line, so multi-megabyte payloads need a body parser). The impact is that an opt-in hard limit fails open on one key spelling, not unbounded allocation from a small input.
CWE:   CWE-770: Allocation of Resources Without Limits or Throttling
CVSS Source:   Harborist
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-83557
DESCRIPTION:   DefaultBaseTypeLimitingValidator is the PolymorphicTypeValidator applied automatically whenever @JsonTypeInfo is used without an explicitly configured custom validator. It denies polymorphic resolution only for a fixed set of "unsafe base types", and its isSafeSubType method returns true unconditionally for every base type outside that set. java.lang.Comparable was absent from the list despite being implemented by a very large fraction of JDK and application classes, comparable in breadth to java.io.Serializable, which is on the list for that reason. An application declaring an @JsonTypeInfo-annotated property or class with Comparable as its base type, and no custom PolymorphicTypeValidator, will accept a type identifier for essentially any class implementing Comparable. This yields an attacker-controlled object instantiation primitive; a demonstrated case constructs a java.io.File for an arbitrary attacker-chosen path, which becomes path-traversal-adjacent if the application subsequently calls path-sensitive methods on the value. No class implementing Comparable has been identified that yields code execution through deserialization alone. Global Default Typing via activateDefaultTyping is not affected, because that method structurally requires an explicit PolymorphicTypeValidator argument. This affects com.fasterxml.jackson.core:jackson-databind from 2.11.0 before 2.18.10, from 2.19.0 before 2.21.6, and from 2.22.0 before 2.22.2, and tools.jackson.core:jackson-databind from 3.0.0 before 3.1.6 and from 3.2.0 before 3.2.2. Users should upgrade to 2.18.10, 2.21.6, 2.22.2, 3.1.6, or 3.2.2.
CWE:   CWE-502: Deserialization of Untrusted Data
CVSS Source:   HeroDevs
CVSS Base score:   5.6
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L)