Security Bulletin: The Pulse App for IBM QRadar SIEM contains components with known vulnerabilities

Vulnerability Details

CVEID:   CVE-2026-93748
DESCRIPTION:   http-cache-semantics through 4.2.0 fails to properly validate security-zeroed cache entries when processing client max-stale directives, allowing unauthenticated attackers to retrieve cached responses belonging to other users. Attackers can request the same URL with a large max-stale value to obtain another user's Set-Cookie session credentials from shared-cache entries that were deliberately zeroed for security reasons.
CWE:   CWE-524: Use of Cache Containing Sensitive Information
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)

CVEID:   CVE-2026-93750
DESCRIPTION:   http-cache-semantics through 4.2.0 contains a cache validation vulnerability in the _varyMatches() function that fails to properly validate Vary header wildcards due to byte-for-byte string comparison. Attackers can request URLs previously fetched by other clients to receive cached responses intended for different users, disclosing sensitive information across clients.
CWE:   CWE-436: Interpretation Conflict
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   5.9
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:N/A:N)

CVEID:   CVE-2026-54272
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Versions 10.1.1 through 10.2.0 are vulnerable to SSRF through misclassification of IPv4-mapped/NAT64 IPv6 addresses. Address6.getType() classifies an address by matching it against a table of known IPv6 special-use prefixes, returning Global unicast when nothing matches. That table had no entry for the IPv4-mapped range (::ffff:0:0/96), so every mapped address fell through to Global unicast; NAT64 addresses matched their own NAT64 … labels. The boolean checks isLoopback, isUnspecified, and isMulticast compared getType() against a fixed label and so returned false, while isLinkLocal and isULA checked only the native IPv6 ranges. The library already exposed isMapped4() and to4(), but did not apply them inside these checks, so a mapped or NAT64 address was never normalized to its embedded IPv4 address before classification. For IPv4-mapped addresses the host OS routes to the IPv4 stack, so the misclassification is reachable on any dual-stack host. For NAT64, the classification bypass is unconditional but end-to-end reachability additionally requires a NAT64/DNS64 gateway in the deployment network.This issue has been fixed in version 10.2.1.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   security-advisories@github.com
CVSS Base score:   6.9
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:N/VA:N/SC:H/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-69192
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.3.1, Address4 accepts an octet written with a leading zero and decodes it as decimal, while the WHATWG URL host parser, inet_aton, and getaddrinfo all decode a leading zero as octal. The library and the network stack therefore disagree about which host a string names. new Address4('012.0.0.1') reports correctForm() of 12.0.0.1 and isPrivate() of false, but fetch('http://012.0.0.1/') connects to 10.0.0.1. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, will classify an internal target as external and allow the request. The defect is in the parse gate rather than in any one classifier, so every consumer of Address4 inherits it: isPrivate(), isLoopback(), isLinkLocal(), isCGNAT(), isInSubnet(), isHostInSubnet(), and correctForm() are all computed from the mis-decoded octets. This issue is fixed in version 10.3.1.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   Github
CVSS Base score:   7.7
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:L/VI:N/VA:N/SC:H/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-69198
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.1.1 until 10.2.2, every special-use classification method is built on isInSubnet, which short-circuits to false whenever the address's own subnet mask is shorter than the reference range's mask. That mask comes verbatim from the CIDR suffix on the parsed input, so appending a suffix such as /0 suppresses classification entirely: isLoopback(), isPrivate(), isLinkLocal(), isCGNAT(), isMulticast(), isUnspecified(), isBroadcast(), isULA(), and getType() all report an internal address as unremarkable, while correctForm() and address still return the real internal target. An application that builds a network trust-boundary decision on these checks, for example a filter intended to block Server-Side Request Forgery, or SSRF, may therefore treat an internal target as external and allow the request. The underlying bit comparison is correct, and mask(n) already returns the first n bits of the full parsed address independently of subnetMask; the defect is solely that the containment guard sits in the classification path. This issue is fixed in version 10.2.2.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   Github
CVSS Base score:   6.9
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:N/VA:N/SC:H/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-73566
DESCRIPTION:   node-tar is a tar archive manipulation library for Node.js. Prior to 7.5.21, node-tar's filesFilter in src/list.ts uses the recursive mapHas helper to walk an archive entry path upward with path.dirname() and no segment cap when tar.t(...) or tar.x(...) receives a non-empty member-selection list. A crafted GNU L or PAX x long-path header with thousands of slash-separated segments reaches this.filter(entry.path, entry) in Parser[CONSUMEHEADER] in src/parse.ts before Unpack[CHECKPATH] applies maxDepth, causing an uncatchable RangeError stack overflow that terminates asynchronous and streaming Node.js consumers. This issue is fixed in version 7.5.21.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   security-advisories@github.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-77037
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. In version 2.2.0, when a disk-backed upload is aborted or truncated before the write stream finishes, multer's disk storage engine removes the visible file but does not close the underlying write file descriptor, leaving a deleted but still open descriptor. A remote attacker able to reach an upload route using the built-in disk storage can send repeated aborted or malformed multipart uploads, each one leaking a file descriptor and retaining disk blocks until the process exits, which can exhaust resources and cause a denial of service. The issue is fixed in multer 2.3.0, which closes the destination write stream on abnormal source termination and defers cleanup until the stream has closed. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-77063
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. When an application uses an asynchronous fileFilter together with the fileSize limit, a race condition in multer's file stream handling can allow a file that exceeds the configured size limit to bypass the size-limit rejection. All versions before 2.3.0 are affected. The impact is limited because the underlying multipart parser still truncates the stream at the size limit, so this is a bypass of the limit rejection rather than uncontrolled resource consumption. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')
CVSS Source:   openjs
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N)

CVEID:   CVE-2026-77078
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. A small multipart request containing two specially crafted text field names can cause an uncaught RangeError (Invalid array length) that terminates the Node.js process. The first field uses a very large numeric array index to allocate a maximum-length sparse array, and a second field then pushes past that length, which throws inside the append-field dependency and is not caught by multer. All versions before 2.3.0 are affected, and the issue is a remotely triggerable denial of service. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-82333
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. A small multipart request with two specially crafted text field names can make multer's field parser synchronously iterate a maximum-length sparse array, blocking the event loop so the process cannot handle other requests. A large numeric array index in the first field allocates a maximum-length sparse array, and a second field with a non-numeric key then triggers a full-length iteration inside the append-field dependency. All versions before 2.3.0 are affected, and this is a remotely triggerable denial of service. multer 2.3.0 adds an opt-in fieldArrayIndexLimit option that rejects oversized array indexes. Upgrade to multer 2.3.0 and set limits.fieldArrayIndexLimit to the largest array index your application needs to remediate.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-82417
DESCRIPTION:   ### Summary `qs.stringify` throws a `TypeError` when it serializes an object whose own `constructor` property has a truthy, non-callable `isBuffer` member. `utils.isBuffer` duck-types buffers by calling `obj.constructor.isBuffer(obj)` after checking only that the property is truthy, so a value such as `{ constructor: { isBuffer: "x" } }` makes the call throw `TypeError: obj.constructor.isBuffer is not a function`. ### Details `lib/stringify.js:127` calls `utils.isBuffer` on every non-primitive value it serializes. `utils.isBuffer` (`lib/utils.js:332`) reads `obj.constructor.isBuffer` and invokes it without verifying that it is a function. `constructor` and `isBuffer` are ordinary property names, so any object carrying them as own properties reaches the unchecked call. Such an object can be built from untrusted input. `qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })` or `{ allowPrototypes: true }` keeps the `constructor` key as an own property (the default parse options drop it), and `JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")` produces the same shape with no qs option involved. Express 4 with its default `query parser` setting and body-parser with `extended: true` both call `qs.parse` with `allowPrototypes: true`, so on those stacks `req.query` and `req.body` can carry the shape directly. #### PoC ```js var qs = require("qs"); qs.stringify(qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })); qs.stringify(JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")); // TypeError: obj.constructor.isBuffer is not a function // at Object.isBuffer (lib/utils.js:332:78) // at stringify (lib/stringify.js:127:45) ``` #### Fix `lib/utils.js`, applied in e83d321 on `main` and released as v6.16.0: ```diff - return !!(obj.constructor && obj.constructor.isBuffer && obj.constructor.isBuffer(obj)); + return !!(obj.constructor && typeof obj.constructor.isBuffer === "function" && obj.constructor.isBuffer(obj)); ``` Real `Buffer`, `safer-buffer`, and browserify `buffer` polyfill instances serialize exactly as before; only the throw is removed. ### Affected versions `=2.2.5 6.16.0`, fixed in v6.16.0. The unguarded duck-type was introduced in 3768a75 and first shipped in v2.2.5 (September 2014). v2.2.4 and earlier used `Buffer.isBuffer` and are not affected. Every release from v2.2.5 through v6.15.3 contains the unguarded call. ### Impact An unauthenticated request can make any code path that re-serializes attacker-influenced data with `qs.stringify` (for example, rebuilding a query string from `req.query` for a redirect or an upstream request, or serializing a parsed JSON body) throw synchronously. In a typical Node.js HTTP framework the throw is caught by the framework error boundary and the affected request returns a 500; the process survives and other requests are unaffected. Where the call runs outside an error boundary, such as an `async` Express 4 handler (where the throw becomes an unhandled promise rejection) or a background job, the process exits, so the impact in that case depends on the application error handling rather than on qs.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   harborist
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-82562
DESCRIPTION:   ### Summary When `qs.parse` is called with `comma: true` and `throwOnLimitExceeded: true`, a comma-separated value under a bracket-push key (`a[]=1,2,3,4`) is split into an array without being compared against `arrayLimit`, while the same value under a flat key (`a=1,2,3,4`), an indexed key (`a[0]=`), a nested key (`a[b]=`), or a dotted key (`a.b=` with `allowDots`) throws the documented `RangeError`. A single parameter such as `a[]=1,2,2,...` therefore produces an inner array of arbitrary length even though the caller opted into the hard limit. This is the `[]=` key form that the fix for CVE-2026-2391 (qs 6.14.2) did not cover. ### Details In `lib/parse.js`, a comma-separated value under a `[]=` key is split and then wrapped as a single nested element (`val = [val]`, so that each `a[]=x,y` group counts as one element of the outer array). The `arrayLimit` check that 6.14.2 added for comma values runs after that wrap, so for `[]=` parts it only ever saw the wrapper of length 1. 6.15.3 added a pre-split comma count so that an oversized value throws before it is allocated, but gated it on an `isFlatArrayValue` flag that `parseValues` set to `false` for any part containing `[]=`, and did not pass it for object-valued input, so the gap remained. #### PoC ```js var qs = require('qs'); var options = { comma: true, arrayLimit: 3, throwOnLimitExceeded: true }; qs.parse('a=1,2,3,4', options); // RangeError: Array limit exceeded. Only 3 elements allowed in an array. qs.parse('a[]=1,2,3,4', options); // { a: [ [ '1', '2', '3', '4' ] ] } (no throw) qs.parse('a[]=' + '1,'.repeat(1000000) + '1', { comma: true, arrayLimit: 20, throwOnLimitExceeded: true }); // no throw; a 1,000,001-element inner array is allocated ``` #### Fix `lib/parse.js`, applied in 8859c37 on `main` and released as v6.16.0: the `isFlatArrayValue` gate is removed, so every comma-split value is counted against `arrayLimit` before splitting regardless of key form. An in-limit group under `a[]=` still counts as one element of the outer array, and the default (`throwOnLimitExceeded: false`) path is unchanged. ### Affected versions `=6.14.2 6.16.0`, fixed in v6.16.0. v6.14.2 introduced `arrayLimit` enforcement for comma values (the fix for CVE-2026-2391) but only for values not under a `[]=` key, and every release from v6.14.2 through v6.15.3 has the same gap. v6.14.0 and v6.14.1, where `throwOnLimitExceeded` exists but does not apply to any comma form, are covered by CVE-2026-2391 rather than this record. Earlier lines (6.7.x through 6.13.x) have `comma` but no `throwOnLimitExceeded`, so there is no hard cap on any comma path to bypass; releases before 6.7.0 have no `comma` option. ### Impact An unauthenticated attacker who can reach an application that parses untrusted query strings or urlencoded bodies with both `comma: true` and `throwOnLimitExceeded: true` (both non-default) can bypass the configured limit with a single `a[]=` parameter and force the parser to allocate an array proportional to the request size. The cost is strictly linear in the attacker-supplied bytes (about 0.1 microseconds and 6 to 7 retained bytes per input byte; the same out-of-memory threshold as the documented default `throwOnLimitExceeded: false` path), so a transport-layer request or body size limit bounds it completely (and node's default maximum HTTP header size of 16 KB already bounds the request line, so multi-megabyte payloads need a body parser). The impact is that an opt-in hard limit fails open on one key spelling, not unbounded allocation from a small input.
CWE:   CWE-770: Allocation of Resources Without Limits or Throttling
CVSS Source:   Harborist
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-104861
DESCRIPTION:   probe-image-size gets image dimensions without downloading the entire file. Prior to 7.4.0, lib/parse_sync/svg.js and lib/parse_stream/svg.js use the searching regular expression /[-_.:a-zA-Z0-9][^]*/, which repeatedly scans to the end of input when attacker-controlled data contains many less-than characters without a closing greater-than character. The synchronous parser converts and scans the full supplied buffer without an input cap, while the streaming parser reparses the complete accumulated SVG prefix for every received chunk. The probe.sync(), probe(stream), and probe(url) entry points can therefore block the Node.js event loop at full CPU, and attacker-controlled chunking can amplify the streaming cost. This issue is fixed in version 7.4.0.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   security-advisories@github.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-88932
DESCRIPTION:   multer is a Node.js middleware for handling multipart/form-data uploads. In versions 2.2.0 through 2.3.0, when a request using disk storage is aborted mid-upload, file writes that complete after multer has already run its abort cleanup are not removed, so each aborted upload can leave an orphaned file on disk. A remote unauthenticated attacker can repeatedly start and abort uploads to accumulate orphaned files and exhaust disk space, causing a denial of service. The issue is fixed in multer 2.4.0, and users should upgrade to 2.4.0 or later.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-90711
DESCRIPTION:   proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.
CWE:   CWE-290: Authentication Bypass by Spoofing
CVSS Source:   openjs
CVSS Base score:   9.1
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N)

CVEID:   CVE-2026-93690
DESCRIPTION:   uri-js through 4.4.1 contains a denial of service vulnerability in the removeDotSegments function that loops infinitely when a path segment begins with Unicode line or paragraph separators. Attackers can trigger this by calling removeDotSegments directly or through normalize/resolve functions with IRI handling enabled, causing the Node.js event loop to block indefinitely until heap exhaustion.
CWE:   CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-93751
DESCRIPTION:   uri-js through 4.4.1 contains an improper UTF-8 decoding vulnerability in pctDecChars() that decodes invalid and overlong percent-encoded sequences into ASCII metacharacters. Attackers can craft percent-encoded payloads to bypass platform decoder validation and inject path traversal or CRLF sequences that downstream consumers process without filtering.
CWE:   CWE-176: Improper Handling of Unicode Encoding
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-101910
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. From 10.2.0 until 10.5.1, the Address6 isPrivate classifier in src/ipv6.ts does not recognize the NAT64 local-use range 64:ff9b:1::/48. Applications that combine isPrivate, isLoopback, and isLinkLocal for a trust-boundary decision can treat an internal IPv4 destination encoded through that range as external. Exploitation depends on a server network using an operator-selected NAT64 prefix within the local-use range. A successful bypass can cross the intended network trust boundary. This issue is fixed in version 10.5.1.
CWE:   CWE-918: Server-Side Request Forgery (SSRF)
CVSS Source:   security-advisories@github.com
CVSS Base score:   6.9
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:N/VA:N/SC:H/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-101913
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.5.1, the Address6 isLinkLocal method in src/ipv6.ts recognizes only fe80::/64 instead of the complete fe80::/10 IPv6 link-local range. An attacker-controlled address elsewhere in fe80::/10 can therefore pass a trust-boundary check that relies on isLinkLocal. The same address is identified as link-local by getType and getScope, exposing the inconsistent classification. A successful bypass can reach an on-link host outside the intended trust boundary. This issue is fixed in version 10.5.1.
CWE:   CWE-697: Incorrect Comparison
CVSS Source:   security-advisories@github.com
CVSS Base score:   6.3
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:L/VI:N/VA:N/SC:L/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-103387
DESCRIPTION:   A weakness has been identified in garycourt uri-js up to 4.4.1. This affects the function URI.parse of the file src/schemes/mailto.ts of the component Mailto Header Handler. This manipulation of the argument to causes uncaught exception. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   cna@vuldb.com
CVSS Base score:   4.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-101911
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.7.1, the Address6 constructor, Address6.isValid, and parse code in src/ipv6.ts accept unbounded strings and expand invalid characters through RE_BAD_CHARACTERS into large diagnostics. Material impact occurs only when an application accepts a very large attacker-controlled field and passes it to Address6 parsing without an earlier length bound. Common URL and header limits, and common body-parser defaults, generally constrain the effect; common defaults typically exclude 32 MiB fields. Megabyte-scale fields can cause a synchronous stall and high transient memory use, approximately 16 MiB can trigger an invalid string length exception, and process termination occurs at approximately 32 MiB. The affected entry points include Address6.isValid and construction paths that reach parse. This issue is fixed in version 10.7.1.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   security-advisories@github.com
CVSS Base score:   6.3
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-101912
DESCRIPTION:   ip-address is a library for parsing and manipulating IPv4 and IPv6 addresses in JavaScript. Prior to 10.7.1, the isInSubnet and isHostInSubnet methods in src/common.ts compare masked binary strings without validating that both operands use the same IP family. A cross-family containment check whose leading address bits match makes the masked strings compare equal even though IPv4 and IPv6 do not share an address space. An allowlist or denylist decision can therefore classify an address outside the intended range as contained. This issue is fixed in version 10.7.1.
CWE:   CWE-697: Incorrect Comparison
CVSS Source:   security-advisories@github.com
CVSS Base score:   6.3
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:L/VA:N/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)