Security Bulletin: Multiple vulnerabilities addressed in IBM SevOne Network Performance Management for September 2026.

Vulnerability Details

CVEID:   CVE-2026-9595
DESCRIPTION:   Impact: When a user-configured proxy on webpack-dev-server has a broad context (e.g. /) and ws: true, it also intercepts the dev server's own HMR WebSocket and forwards it to the proxy target. This leaks the browser's cookies and Origin header to the backend, bypasses the dev server's Host/Origin validation, and corrupts the HMR socket (both HMR and the proxy end up writing to the same socket). Patches: Fixed in webpack-dev-server@5.2.5. Workarounds: Scope user-defined proxy context to specific paths instead of /, or omit ws: true from the proxy entry when WebSocket forwarding is not required.
CWE:   CWE-346: Origin Validation Error
CVSS Source:   NVD
CVSS Base score:   4.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-56864
DESCRIPTION:   A malicious GOSUMDB was capable of serving arbitrary module content not contained within the transparency log. This attack allows for a coordinating GOPROXY and GOSUMDB to serve a client malicious module content that cannot be detected by evaluating the transparency log. In order to determine if you have been affected: rm -r go.sum go.work.sum vendor/ && go mod tidy
CWE:   CWE-347: Improper Verification of Cryptographic Signature
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N)

CVEID:   CVE-2026-56865
DESCRIPTION:   A malicious GOPROXY was previously capable of forging up to two sumdb tiles that allow for a requested module to bypass the GOSUMDB check and persist attacker-controlled module content to a local Go module cache. This attack allows for a malicious GOPROXY to serve malicious module content that cannot be detected by evaluating the transparency log. All tiles are now correctly verified against their parents. In order to determine if you have been affected: rm -r go.sum go.work.sum vendor/ && go mod tidy
CWE:   CWE-347: Improper Verification of Cryptographic Signature
CVSS Source:   CISA ADP
CVSS Base score:   8.4
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-14505
DESCRIPTION:   The ECDSA implementation of the Elliptic package generates incorrect signatures if an interim value of 'k' (as computed based on step 3.2 of RFC 6979 https://datatracker.ietf.org/doc/html/rfc6979 ) has leading zeros and is susceptible to cryptanalysis, which can lead to secret key exposure. This happens, because the byte-length of 'k' is incorrectly computed, resulting in its getting truncated during the computation. Legitimate transactions or communications will be broken as a result. Furthermore, due to the nature of the fault, attackers could–under certain conditions–derive the secret key, if they could get their hands on both a faulty signature generated by a vulnerable version of Elliptic and a correct signature for the same inputs. This issue affects all known versions of Elliptic (at the time of writing, versions less than or equal to 6.6.1).
CWE:   CWE-1240: Use of a Cryptographic Primitive with a Risky Implementation
CVSS Source:   HeroDevs
CVSS Base score:   5.6
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L)

CVEID:   CVE-2026-92595
DESCRIPTION:   Nodemailer (npm package `nodemailer`) versions 9.1.0 and earlier do not honor the `disableFileAccess` and `disableUrlAccess` sandbox options when message content is resolved through the public plugin API `MailMessage.resolveContent()` using the documented legacy three-argument signature `resolveContent(data, key, callback)`. Because `shared.resolveContent()` normalizes the missing `options` argument to an empty object, the message-level flags copied into `mail.data` by the MailMessage constructor are discarded, and `resolveContentValue()` skips both access-control checks, reaching `nmfetch(url)` or `fs.createReadStream(path)`. As a result, plugin or application code that resolves untrusted message content (html, text, attachment `path` or `href`) via this API can be induced to read arbitrary local files or issue outbound HTTP(S) requests (server-side request forgery), bypassing the sandbox the application enabled. The internal paths used by `transporter.sendMail()` (`resolveAll()`, `_convertDataImages()`, and the MIME streaming path) are not affected. Fixed in version 9.1.1.
CWE:   CWE-73: External Control of File Name or Path
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   5.9
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:L/A:N)

CVEID:   CVE-2026-92596
DESCRIPTION:   Nodemailer before 9.1.0 contains a quadratic time complexity vulnerability in the addressparser component that allows remote attackers to cause denial of service by supplying a crafted comma-separated address list. Attackers can send a single email with a large number of addresses to block the Node.js event loop for extended periods, consuming 100% CPU and freezing the process.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-92597
DESCRIPTION:   Nodemailer versions = 6.9.16 and 9.1.0 mis-parse RFC 5322 comments in email addresses: in lib/addressparser, a comment closed immediately before a non-break character causes the tokenizer to concatenate the atoms surrounding the comment instead of treating the comment as folding whitespace that terminates the domain. A recipient address such as user@good-corp.com(x)evil.com is therefore read by Nodemailer as the single domain good-corp.comevil.com (registrable domain comevil.com, which an attacker can register) and used for both the SMTP envelope (RCPT TO) and the emitted To:/From: headers, while a conformant RFC 5322 parser terminates the domain at the comment and reads good-corp.com. An application that validates the recipient domain with a strict RFC 5322 parser (without inspecting parse defects) or a naive prefix/substring allow-list and then hands the raw address to Nodemailer can be induced to deliver mail to a domain the attacker controls. Fixed in 9.1.0.
CWE:   CWE-436: Interpretation Conflict
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:L/A:N)

CVEID:   CVE-2026-92598
DESCRIPTION:   Nodemailer before 9.1.0 fails to apply UTS-46 normalization when encoding international domain names, causing the domain resolver to compute a different Punycode A-label than standards-compliant parsers. Attackers can craft recipient addresses with invisible characters or compatibility mappings that pass domain allow-list checks but are delivered to attacker-controlled domains via SMTP.
CWE:   CWE-436: Interpretation Conflict
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   6.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:L/A:N)

CVEID:   CVE-2026-84292
DESCRIPTION:   fast-uri serializes the port component of a URI without validating it. When recomposing the authority, the userinfo and host components are escaped but the port is concatenated verbatim, so a port value that is not a sequence of digits can inject authority delimiters, demoting the intended host to userinfo and pointing the authority at an attacker-controlled host. Both fast-uri and Node's URL read the result back as the attacker's host with no error, so re-validating the built URI does not catch it. This affects applications that build URIs from parts and assign untrusted data to the port component through the serialize, normalize, or equal functions in their object forms. The issue affects fast-uri versions before 2.4.6, from 3.0.0 before 3.1.7, and from 4.0.0 before 4.1.4. It is fixed in 2.4.6, 3.1.7, and 4.1.4, where recomposeAuthority rejects any port that is not a digit sequence per RFC 3986.
CWE:   CWE-116: Improper Encoding or Escaping of Output
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-84394
DESCRIPTION:   fast-uri accepts a host that contains an unbalanced or misplaced authority bracket without reporting an error. A host that starts with an opening bracket but does not end with a closing bracket is neither validated as an IP literal nor canonicalized as a domain name, so parse() returns it as the host with error undefined, while Node's URL and the HTTP clients built on it resolve the same string to a different host. An application that reads the parsed host to make a host decision, such as an SSRF denylist, a redirect allowlist, or proxy routing, and then passes the original URL to an HTTP client evaluates its policy against a string that is not the host the request reaches. The same host is carried through normalize, equal, and resolve. This affects fast-uri versions 2.4.5, 3.1.6, and 4.1.3, and is fixed in 2.4.6, 3.1.7, and 4.1.4, where parse() reports a malformed host for any host that contains a bracket but is not a valid IPv6 literal.
CWE:   CWE-436: Interpretation Conflict
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-14631
DESCRIPTION:   webpack-dev-server versions 5.2.5 and earlier terminate the whole Node.js process when an unauthenticated peer sends either a normal HTTP request with a malformed Host header or a WebSocket upgrade to the default /ws endpoint with a malformed Origin header. The malformed value causes an uncaught exception in the host-validation path and crashes the dev server. Impact is limited to availability of the development server, no data disclosure, no code execution. Patches: upgrade to webpack-dev-server 5.2.6. Workarounds: keep the dev server bound to localhost (the default) and do not expose it to untrusted networks.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   openjs
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-15308
DESCRIPTION:   The incremental HTML parser (html.parser.HTMLParser) allows for CPU denial-of-service through repeated unterminated markup declarations when processing uncontrolled data.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   NVD
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-82417
DESCRIPTION:   ### Summary `qs.stringify` throws a `TypeError` when it serializes an object whose own `constructor` property has a truthy, non-callable `isBuffer` member. `utils.isBuffer` duck-types buffers by calling `obj.constructor.isBuffer(obj)` after checking only that the property is truthy, so a value such as `{ constructor: { isBuffer: "x" } }` makes the call throw `TypeError: obj.constructor.isBuffer is not a function`. ### Details `lib/stringify.js:127` calls `utils.isBuffer` on every non-primitive value it serializes. `utils.isBuffer` (`lib/utils.js:332`) reads `obj.constructor.isBuffer` and invokes it without verifying that it is a function. `constructor` and `isBuffer` are ordinary property names, so any object carrying them as own properties reaches the unchecked call. Such an object can be built from untrusted input. `qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })` or `{ allowPrototypes: true }` keeps the `constructor` key as an own property (the default parse options drop it), and `JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")` produces the same shape with no qs option involved. Express 4 with its default `query parser` setting and body-parser with `extended: true` both call `qs.parse` with `allowPrototypes: true`, so on those stacks `req.query` and `req.body` can carry the shape directly. #### PoC ```js var qs = require("qs"); qs.stringify(qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })); qs.stringify(JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")); // TypeError: obj.constructor.isBuffer is not a function // at Object.isBuffer (lib/utils.js:332:78) // at stringify (lib/stringify.js:127:45) ``` #### Fix `lib/utils.js`, applied in e83d321 on `main` and released as v6.16.0: ```diff - return !!(obj.constructor && obj.constructor.isBuffer && obj.constructor.isBuffer(obj)); + return !!(obj.constructor && typeof obj.constructor.isBuffer === "function" && obj.constructor.isBuffer(obj)); ``` Real `Buffer`, `safer-buffer`, and browserify `buffer` polyfill instances serialize exactly as before; only the throw is removed. ### Affected versions `=2.2.5 6.16.0`, fixed in v6.16.0. The unguarded duck-type was introduced in 3768a75 and first shipped in v2.2.5 (September 2014). v2.2.4 and earlier used `Buffer.isBuffer` and are not affected. Every release from v2.2.5 through v6.15.3 contains the unguarded call. ### Impact An unauthenticated request can make any code path that re-serializes attacker-influenced data with `qs.stringify` (for example, rebuilding a query string from `req.query` for a redirect or an upstream request, or serializing a parsed JSON body) throw synchronously. In a typical Node.js HTTP framework the throw is caught by the framework error boundary and the affected request returns a 500; the process survives and other requests are unaffected. Where the call runs outside an error boundary, such as an `async` Express 4 handler (where the throw becomes an unhandled promise rejection) or a background job, the process exits, so the impact in that case depends on the application error handling rather than on qs.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   harborist
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-82562
DESCRIPTION:   ### Summary When `qs.parse` is called with `comma: true` and `throwOnLimitExceeded: true`, a comma-separated value under a bracket-push key (`a[]=1,2,3,4`) is split into an array without being compared against `arrayLimit`, while the same value under a flat key (`a=1,2,3,4`), an indexed key (`a[0]=`), a nested key (`a[b]=`), or a dotted key (`a.b=` with `allowDots`) throws the documented `RangeError`. A single parameter such as `a[]=1,2,2,...` therefore produces an inner array of arbitrary length even though the caller opted into the hard limit. This is the `[]=` key form that the fix for CVE-2026-2391 (qs 6.14.2) did not cover. ### Details In `lib/parse.js`, a comma-separated value under a `[]=` key is split and then wrapped as a single nested element (`val = [val]`, so that each `a[]=x,y` group counts as one element of the outer array). The `arrayLimit` check that 6.14.2 added for comma values runs after that wrap, so for `[]=` parts it only ever saw the wrapper of length 1. 6.15.3 added a pre-split comma count so that an oversized value throws before it is allocated, but gated it on an `isFlatArrayValue` flag that `parseValues` set to `false` for any part containing `[]=`, and did not pass it for object-valued input, so the gap remained. #### PoC ```js var qs = require('qs'); var options = { comma: true, arrayLimit: 3, throwOnLimitExceeded: true }; qs.parse('a=1,2,3,4', options); // RangeError: Array limit exceeded. Only 3 elements allowed in an array. qs.parse('a[]=1,2,3,4', options); // { a: [ [ '1', '2', '3', '4' ] ] } (no throw) qs.parse('a[]=' + '1,'.repeat(1000000) + '1', { comma: true, arrayLimit: 20, throwOnLimitExceeded: true }); // no throw; a 1,000,001-element inner array is allocated ``` #### Fix `lib/parse.js`, applied in 8859c37 on `main` and released as v6.16.0: the `isFlatArrayValue` gate is removed, so every comma-split value is counted against `arrayLimit` before splitting regardless of key form. An in-limit group under `a[]=` still counts as one element of the outer array, and the default (`throwOnLimitExceeded: false`) path is unchanged. ### Affected versions `=6.14.2 6.16.0`, fixed in v6.16.0. v6.14.2 introduced `arrayLimit` enforcement for comma values (the fix for CVE-2026-2391) but only for values not under a `[]=` key, and every release from v6.14.2 through v6.15.3 has the same gap. v6.14.0 and v6.14.1, where `throwOnLimitExceeded` exists but does not apply to any comma form, are covered by CVE-2026-2391 rather than this record. Earlier lines (6.7.x through 6.13.x) have `comma` but no `throwOnLimitExceeded`, so there is no hard cap on any comma path to bypass; releases before 6.7.0 have no `comma` option. ### Impact An unauthenticated attacker who can reach an application that parses untrusted query strings or urlencoded bodies with both `comma: true` and `throwOnLimitExceeded: true` (both non-default) can bypass the configured limit with a single `a[]=` parameter and force the parser to allocate an array proportional to the request size. The cost is strictly linear in the attacker-supplied bytes (about 0.1 microseconds and 6 to 7 retained bytes per input byte; the same out-of-memory threshold as the documented default `throwOnLimitExceeded: false` path), so a transport-layer request or body size limit bounds it completely (and node's default maximum HTTP header size of 16 KB already bounds the request line, so multi-megabyte payloads need a body parser). The impact is that an opt-in hard limit fails open on one key spelling, not unbounded allocation from a small input.
CWE:   CWE-770: Allocation of Resources Without Limits or Throttling
CVSS Source:   Harborist
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-67213
DESCRIPTION:   nanoid (Nano ID) before 5.1.6 contains an infinite loop in the customAlphabet and customRandom functions. When these functions are configured with a size of 0, the internal generation loop never satisfies its exit condition and spins indefinitely, hanging the calling thread. An application that passes an unvalidated, attacker-controlled size of 0 to these functions is exposed to a denial-of-service condition.
CWE:   CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
CVSS Source:   NVD
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-67214
DESCRIPTION:   nanoid (Nano ID) before 3.3.16 and 5.1.16 contains an infinite loop in the customAlphabet and nanoid functions of its non-secure module (nanoid/non-secure). When these functions are given a negative size, the loop counter is decremented from a negative value and never reaches its termination condition, spinning indefinitely and hanging the calling thread. An application that passes an unvalidated, attacker-controlled negative size to these functions is exposed to a denial-of-service condition.
CWE:   CWE-835: Loop with Unreachable Exit Condition ('Infinite Loop')
CVSS Source:   NVD
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-14620
DESCRIPTION:   webpack-dev-server versions 5.2.5 and earlier expose two internal developer endpoints, /webpack-dev-server/open-editor and /webpack-dev-server/invalidate, that perform state-changing actions on any GET request without verifying that the request originated from the dev server's own page. Any website a developer visits while the dev server is running can trigger these endpoints cross-origin with no interaction beyond the visit. An attacker can open an arbitrary existing local file in the developer's editor, including files outside the project root, and repeated requests can spawn editor processes and force recompilations that degrade the developer's machine. Patches: upgrade to webpack-dev-server 5.2.6. Workarounds: none.
CWE:   CWE-352: Cross-Site Request Forgery (CSRF)
CVSS Source:   NVD
CVSS Base score:   4.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:N/A:L)

CVEID:   CVE-2026-77037
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. In version 2.2.0, when a disk-backed upload is aborted or truncated before the write stream finishes, multer's disk storage engine removes the visible file but does not close the underlying write file descriptor, leaving a deleted but still open descriptor. A remote attacker able to reach an upload route using the built-in disk storage can send repeated aborted or malformed multipart uploads, each one leaking a file descriptor and retaining disk blocks until the process exits, which can exhaust resources and cause a denial of service. The issue is fixed in multer 2.3.0, which closes the destination write stream on abnormal source termination and defers cleanup until the stream has closed. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-77063
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. When an application uses an asynchronous fileFilter together with the fileSize limit, a race condition in multer's file stream handling can allow a file that exceeds the configured size limit to bypass the size-limit rejection. All versions before 2.3.0 are affected. The impact is limited because the underlying multipart parser still truncates the stream at the size limit, so this is a bypass of the limit rejection rather than uncontrolled resource consumption. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-362: Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition')
CVSS Source:   openjs
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N)

CVEID:   CVE-2026-77078
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. A small multipart request containing two specially crafted text field names can cause an uncaught RangeError (Invalid array length) that terminates the Node.js process. The first field uses a very large numeric array index to allocate a maximum-length sparse array, and a second field then pushes past that length, which throws inside the append-field dependency and is not caught by multer. All versions before 2.3.0 are affected, and the issue is a remotely triggerable denial of service. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-82333
DESCRIPTION:   multer is a middleware for handling multipart/form-data in Node.js. A small multipart request with two specially crafted text field names can make multer's field parser synchronously iterate a maximum-length sparse array, blocking the event loop so the process cannot handle other requests. A large numeric array index in the first field allocates a maximum-length sparse array, and a second field with a non-numeric key then triggers a full-length iteration inside the append-field dependency. All versions before 2.3.0 are affected, and this is a remotely triggerable denial of service. multer 2.3.0 adds an opt-in fieldArrayIndexLimit option that rejects oversized array indexes. Upgrade to multer 2.3.0 and set limits.fieldArrayIndexLimit to the largest array index your application needs to remediate.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-75899
DESCRIPTION:   fast-uri is a URI parser for Node.js. It decodes percent escapes in a hostname during parsing and then decodes the parsed hostname a second time during authority recomposition, so a single call to normalize or resolve can turn nested percent-encoded input into a different network destination such as a loopback hostname or address. For example, a doubly encoded host that spells out a loopback name decodes to that live host in one operation, which contradicts RFC 3986 section 2.4 that an implementation must not decode the same string more than once. An application that normalizes or resolves an untrusted HTTP-family URI before outbound routing, redirect validation, or a host-policy check can receive a destination different from the one the original encoded host represented, giving a server-side request forgery and host-policy bypass primitive. This is an incomplete-fix variant of CVE-2026-6322. The affected versions are 2.4.1 up to but not including 2.4.5, 3.1.2 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which normalize percent escapes once and preserve encoded percent signs. Users should upgrade to a patched version.
CWE:   CWE-174: Double Decoding of the Same Data
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-75931
DESCRIPTION:   fast-uri is a URI parser for Node.js. It canonicalizes a host to its ASCII form only when the input carries an explicit scheme, so a scheme-relative reference such as a host preceded by two slashes is returned with its host verbatim and no error set. As a result fast-uri's own entry points disagree with each other: parse, resolve, normalize, and equal can yield different hosts for the same input depending only on whether a scheme is written out, and equal can return opposite verdicts for the same pair of hosts. An application that extracts a host with fast-uri to check it against a policy list and then resolves the same reference can make its decision on one host while the destination is another, enabling host confusion and policy bypass. The affected versions are 2.4.2 up to but not including 2.4.5, 3.1.3 up to but not including 3.1.6, and 4.0.1 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which canonicalize the host consistently across the resolve path. Users should upgrade to a patched version.
CWE:   CWE-436: Interpretation Conflict
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-75975
DESCRIPTION:   fast-uri is a URI parser for Node.js. Its custom parser for bracketed IPv6 literals does not validate the complete IPv6 grammar, so invalid trailing text in an authority can be silently discarded and a malformed attacker-controlled host is turned into a different valid IPv6 destination. For example, a bracketed literal with invalid trailing characters is normalized to the unspecified address, which a Node HTTP client then connects to a local service over loopback, and other malformed literals collapse to private-range addresses. No error is set on the parsed result, so an application checking the error field cannot detect the rewrite. An application that normalizes untrusted URLs before outbound requests, redirects, proxy routing, or address-policy enforcement can be redirected to a local or private IPv6 target, giving a server-side request forgery and address-policy bypass primitive. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which validate bracketed IP literals against the full grammar and mark malformed literals as authority errors. Users should upgrade to a patched version.
CWE:   CWE-20: Improper Input Validation
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-76172
DESCRIPTION:   fast-uri is a URI parser for Node.js. During parsing it runs a legacy decoding pass over the scheme component and never re-escapes the result, and serialization writes the scheme back out verbatim, unlike the host component which is re-escaped. As a result an input whose scheme carries percent-encoded slashes parses as a scheme with no authority, so the parsed host and error are both undefined, yet resolving or normalizing that same input emits a network-path reference whose authority is attacker-chosen and re-parses to that host. An application that allowlists on the parsed host, or treats a reference with no authority as safe to resolve against its base, gets the opposite of what it checked, giving an off-site redirect, server-side request forgery, or address-policy bypass. The legacy decoder also expands non-standard escape forms, widening the issue past upstream filters, and control characters in the scheme can reach the output as raw carriage return and line feed. The affected versions are 2.3.1 up to but not including 2.4.5, 3.0.0 up to but not including 3.1.6, and 4.0.0 up to but not including 4.1.3. The issue is fixed in 2.4.5, 3.1.6, and 4.1.3, which reject a scheme that is not valid after decoding. Users should upgrade to a patched version.
CWE:   CWE-177: Improper Handling of URL Encoding (Hex Encoding)
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-9358
DESCRIPTION:   A vulnerability was determined in postcss-selector-parser up to 6.1.2/7.1.2. Affected is the function toString of the file src/selectors/container.js of the component AST Serialization. Executing a manipulation can lead to uncontrolled recursion. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 6.1.3 and 7.1.3 is able to address this issue. This patch is called 5bc698cef66f8abd12610dc623e5d67cbc0f869d. It is suggested to upgrade the affected component. The vendor explains, that according to his definition "DoS on server-side on user-generated CSS is low risk for us (since most users compile own CSS with PostCSS)." The commits were backported to 6.x branch, which was the most downloaded version.
CWE:   CWE-404: Improper Resource Shutdown or Release
CVSS Source:   cna@vuldb.com
CVSS Base score:   4.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-90711
DESCRIPTION:   proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation.
CWE:   CWE-290: Authentication Bypass by Spoofing
CVSS Source:   openjs
CVSS Base score:   9.1
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N)

CVEID:   CVE-2026-88932
DESCRIPTION:   multer is a Node.js middleware for handling multipart/form-data uploads. In versions 2.2.0 through 2.3.0, when a request using disk storage is aborted mid-upload, file writes that complete after multer has already run its abort cleanup are not removed, so each aborted upload can leave an orphaned file on disk. A remote unauthenticated attacker can repeatedly start and abort uploads to accumulate orphaned files and exhaust disk space, causing a denial of service. The issue is fixed in multer 2.4.0, and users should upgrade to 2.4.0 or later.
CWE:   CWE-400: Uncontrolled Resource Consumption
CVSS Source:   openjs
CVSS Base score:   5.3
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L)

CVEID:   CVE-2026-86472
DESCRIPTION:   fast-uri is a dependency-free RFC 3986 URI parser for Node.js, used by Fastify and ajv. In versions before 2.4.7, from 3.0.0 through 3.1.7, and from 4.0.0 through 4.1.4, fast-uri folds the host to lowercase before it percent-decodes the host, so a percent-encoded uppercase octet such as %41 decodes to a literal A that is never folded. For a scheme-relative reference such as //host there is no scheme, so the host canonicalization that would normally repair this does not run, and parse, normalize, and equal then disagree on the same host. An application that makes a case-sensitive host decision on fast-uri output, for example a host allowlist or denylist that compares the parsed host or uses equal, can be steered past the check with a percent-encoded uppercase octet, and because hostnames are case-insensitive in DNS and HTTP the evading spelling still reaches the host the check meant to gate. The issue is fixed in fast-uri 2.4.7, 3.1.8, and 4.1.5, and users should upgrade to one of those versions or later. As a workaround, compare hosts case-insensitively by lowercasing the parsed host before any allowlist or denylist decision.
CWE:   CWE-178: Improper Handling of Case Sensitivity
CVSS Source:   openjs
CVSS Base score:   4.8
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N)

CVEID:   CVE-2026-18540
DESCRIPTION:   undici's retry interceptor can append the body of a ranged retry response to bytes already delivered from an earlier partial response while still presenting the original response's status and headers. This happens when an upstream server delivers part of a body without a trustworthy resume checkpoint, for example a non-success response whose headers were already sent or a partial-content response with an unusable content range, then closes the connection and answers the resumed range request with more bytes. As a result the response body can be longer than the Content-Length that the application observes. An application that relays such a response to a downstream HTTP/1.1 peer without normalizing the framing can emit a body that exceeds the forwarded Content-Length, and the excess bytes can be interpreted as the start of a following response, which enables downstream response splitting or desynchronization. Exploitation requires an attacker-controlled upstream server and an application that forwards the response through a framing-sensitive path. This affects undici versions before 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2.
CWE:   CWE-444: Inconsistent Interpretation of HTTP Requests ('HTTP Request/Response Smuggling')
CVSS Source:   openjs
CVSS Base score:   3.7
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N)

CVEID:   CVE-2026-19534
DESCRIPTION:   undici's WebSocket client crashes the whole Node.js process during the opening handshake when a server responds with a subprotocol that the client never requested. A default WebSocket connection sends no subprotocol, but if the server's 101 response includes a Sec-WebSocket-Protocol header, undici dereferences a null value while checking it against the requested list and throws an uncaught TypeError. Because that code runs inside a microtask with no surrounding error handling, the exception propagates and terminates the process under Node's default behavior, instead of gracefully failing the connection as required by the WebSocket protocol. Any application that opens a WebSocket to an attacker-controlled or compromised server, or over a plaintext connection subject to a machine-in-the-middle, can be crashed remotely without authentication in the default configuration. This affects undici versions from 6.7.0 up to 6.28.1, from 7.0.0 up to 7.29.1, and from 8.0.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   openjs
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-85024
DESCRIPTION:   undici bundles a WebSocket client whose permessage-deflate size-limit cleanup removes all listeners from the internal zlib inflate stream, including its error listener, while that stream can still emit. When a remote peer sends a compressed payload that crosses the built-in 128 MiB decompressed-payload limit and then contains a malformed DEFLATE byte, the inflate stream emits a data error with no listener attached, which Node.js treats as a fatal unhandled error and terminates the entire process. Exploitation is remote and unauthenticated, requires no application mistake, and is asymmetric, since roughly 130 KB on the wire expands past the limit and crashes the process, and reconnecting can repeat the crash. This affects undici versions from 6.25.0 up to 6.28.1, from 7.28.0 up to 7.29.1, and from 8.1.0 up to 8.10.2. Users should upgrade to undici 6.28.1, 7.29.1, or 8.10.2.
CWE:   CWE-248: Uncaught Exception
CVSS Source:   openjs
CVSS Base score:   5.9
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-85062
DESCRIPTION:   Colord is a tiny yet powerful tool for high-performance color manipulations and conversions. Prior to 2.9.4, synchronous CSS color string matchers in src/colorModels/rgbString.ts, src/colorModels/hslString.ts, src/colorModels/hwbString.ts, src/colorModels/lchString.ts, and src/colorModels/cmykString.ts use the ambiguous numeric regular expression ([+-]?\d*.?\d+), allowing the same digits to be divided between overlapping quantifiers in quadratically many ways when malformed input is rejected. An attacker who can supply an unbounded color string to colord(), getFormat(), isEqual(), mix(), or contrast(), including through a request body, JSON field, or uploaded stylesheet, can block the processing thread with a multi-kilobyte payload. The affected matchers are parseRgbaString, parseHslaString, parseHwbaString, parseLchaString, and parseCmykaString. This issue is fixed in version 2.9.4.
CWE:   CWE-1333: Inefficient Regular Expression Complexity
CVSS Source:   security-advisories@github.com
CVSS Base score:   6.9
CVSS Vector:   (CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:N/VI:N/VA:L/SC:N/SI:N/SA:N/E:X/CR:X/IR:X/AR:X/MAV:X/MAC:X/MAT:X/MPR:X/MUI:X/MVC:X/MVI:X/MVA:X/MSC:X/MSI:X/MSA:X/S:X/AU:X/R:X/V:X/RE:X/U:X)

CVEID:   CVE-2026-8643
DESCRIPTION:   pip would treat console_scripts and gui_scripts as paths instead of file names without sanitizing the resolved absolute path to the installation directory, leading to entry points being installed outside the installation directory.
CWE:   CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
CVSS Source:   NVD
CVSS Base score:   5.5
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-17495
DESCRIPTION:   moment is a JavaScript date library for parsing, validating, manipulating, and formatting dates. In versions 2.29.2 through 2.30.1, a specially crafted non-string object passed to moment.locale() can bypass the locale-name path-traversal guard. The guard assumes the input is a string, so an object whose match() method satisfies the check while its toString() returns a traversal path reaches an internal require() call with attacker-controlled path segments. This is an incomplete fix for CVE-2022-24785 and primarily affects npm (server-side) users that pass user-provided input directly to moment.locale(). The issue is fixed in moment 2.31.0, and users should upgrade to 2.31.0 or later. As a workaround, validate that any user-supplied input is a string before passing it to moment.locale().
CWE:   CWE-27: Path Traversal: 'dir/../../filename'
CVSS Source:   openjs
CVSS Base score:   5.9
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N)

CVEID:   CVE-2026-90776
DESCRIPTION:   Nodemailer versions 9.1.0 through 10.0.4 contain a quadratic time complexity vulnerability in the addressparser component when parsing email addresses with RFC 5322 comments. Attackers can craft malicious email headers with comment-separated atoms to consume excessive CPU and block the Node.js event loop for several seconds, causing denial of service.
CWE:   CWE-407: Inefficient Algorithmic Complexity
CVSS Source:   disclosure@vulncheck.com
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)