IBM Support

Security Bulletin: IBM i is Affected By Multiple Vulnerabilities in OpenSSL

Security Bulletin


Summary

IBM i is vulnerable to multiple vulnerabilites [CVE-2026-54874, CVE-2026-63072, CVE-2026-63074, CVE-2026-63076, CVE-2026-75803] in OpenSSL as described in the vulnerability details section.

Vulnerability Details

CVEID:   CVE-2026-54874
DESCRIPTION:   Issue summary: Receiving a DTLS record for a future epoch while a handshake is in progress causes OpenSSL to buffer far more memory than the record itself requires. Impact summary: A peer can use a small amount of network traffic to make an OpenSSL DTLS endpoint retain a disproportionately large amount of memory, which may lead to a Denial of Service. CWE: CWE-405: Asymmetric Resource Consumption (Amplification) Description: While a DTLS handshake is in progress, a peer may legitimately have already moved on to the next epoch (for example, having sent its ChangeCipherSpec and Finished messages) before the local endpoint has processed the same transition, typically because of reordering on the underlying UDP transport. OpenSSL buffers such early records so that they can be processed once the local endpoint catches up. Buffering a record currently retains the entire read buffer it arrived in, which is sized to hold the largest possible DTLS record (around 16 kilobytes), rather than just the bytes that make up the record itself. Up to 100 such records may be buffered per connection. As a result, a peer that sends a stream of small forged records claiming to belong to the next epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of memory, despite sending only a small fraction of that amount of data over the network. An attacker therefore gains a memory amplification factor of around 1200, and can multiply the effect across as many associations as it is able to open, making this a remote memory exhaustion Denial of Service risk for DTLS servers. Since the memory retained per connection remains bounded, and any limit an application already places on the number of concurrent associations also bounds the total exposure, this issue has been assessed as Low severity. FIPS impact: no No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2. OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4. OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8. OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7. OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22. Premium support customers only: OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr This issue was reported on 18 May 2026 by Amazon Web Services. The fix has been developed by Matt Caswell. -- cut (non-publishing metadata for internal use) -- Reported by: Amazon Web Services Fixed by: Matt Caswell
CWE:   CWE-405: Asymmetric Resource Consumption (Amplification)
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-63072
DESCRIPTION:   Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive can write and cleanse more bytes than that query reports, causing an 8-byte out-of-bounds heap write. Impact summary: An attacker who supplies a crafted CMS message can trigger a deterministic 8-byte out-of-bounds heap write when the victim decrypts it with CMS_decrypt(), corrupting the heap and typically resulting in a Denial of Service. CWE: CWE-787: Out-of-bounds Write Description: The key-wrap OID is potentially attacker-controlled on the wire. CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers. An attacker can take a legitimate message and change a single OID byte to select the padded variant while leaving the message otherwise valid. Since the unwrap key is derived from the recipient's private operation (ECDH key agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot pass, and the decryption fails with integrity failure. The write is a fixed-size (8-byte), fixed-value (zero) heap overflow immediately past the allocation, requires no special configuration, and is reachable from the public CMS_decrypt() function. The consequence is a heap corruption leading to a Denial of Service. The fix in the CMS code sizes the unwrap output buffer for the worst case so a failed unwrap cannot write past the allocation. FIPS impact: no As the CMS code lives outside the FIPS module boundary, no FIPS modules are affected by this CVE.
CWE:   CWE-787: Out-of-bounds Write
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-63074
DESCRIPTION:   Issue summary: The OpenSSL Certificate Management Protocol (CMP) caches additional certificates (extraCerts) sent in a CMP message, but never expunges them (for instance if they are invalid). If a server reuses an OSSL_CMP_CTX frequently, this cache of extraCerts may grow unboundedly, and a malicious client may flood a CMP server with requests driving this growth. Impact summary: Users utilizing a CMP server that reuses a single OSSL_CMP_CTX for the lifetime of a server process may observe unbounded memory growth in the event a malicious client repeatedly sends requests containing unique extra certificates, which may lead to OOM conditions. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: If a remote user sends CMP messages to a server with a list of extraCerts and the message is rejected, the extraCerts from the message remains in the server contexts untrusted certificate stack. This exposes servers with long lived ctx objects to Denial of Service attacks in which an attacker sends messages intending to be rejected with a large list of additional certificates repeatedly, forcing the server to store them indefinitely. The issue was fixed by removing the added extra certs if the message is rejected, using the same method as when the context is configured to not do caching at all. FIPS impact: no As the CMP code lives outside the FIPS module boundary, no FIPS modules are affected by this CVE.
CWE:   CWE-770: Allocation of Resources Without Limits or Throttling
CVSS Source:   CISA ADP
CVSS Base score:   5.9
CVSS Vector:   (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-63076
DESCRIPTION:   Issue summary: OpenSSL CMP password based protection verification only checks whether the protectionAlg parameter was not NULL and not its ASN.1 type, before treating it as a PBMParameter. A crafted message can contain a parameter of a different type, which is then dereferenced as an invalid pointer. Impact summary: A remote, unauthenticated attacker can crash an application acting as a CMP server that accepts PBM-protected messages, or a CMP client talking to a malicious or intercepted CMP server, resulting in a Denial of Service. CWE: CWE-476: NULL Pointer Dereference Description: When verifying the password-based MAC protection of a CMP message, OpenSSL library reads the protectionAlg algorithm parameter with X509_ALGOR_get0(), which returns both the parameter type and its value pointer. The value is then cast to an ASN1_STRING and treated as the expected PBMParameter after only checking that pointer is not NULL. The parameter type returned by X509_ALGOR_get0() was never consulted. This happens during protection verification, before any MAC is computed, so no knowledge of the PBM shared secret is required; the only precondition is that PBM verification is reachable. On the server side this is reached from OSSL_CMP_SRV_process_request() for any application that stands up a CMP server accepting PBM-protected messages, and on the client side from CMP response validation against a malicious or on-path (MITM) server. The reliable consequence is a denial of service; there is no memory disclosure, no controlled memory write, and no path to code execution. CMP is a specialized feature that an application must explicitly enable. FIPS impact: no As the CMP code lives outside the FIPS module boundary, no FIPS modules are affected by this CVE.
CWE:   CWE-476: NULL Pointer Dereference
CVSS Source:   CISA ADP
CVSS Base score:   7.5
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2026-75803
DESCRIPTION:   Issue summary: ChaCha20-Poly1305 and AES-OCB decryption with an empty ciphertext can report success without verifying the supplied authentication tag when the operation is finalized by calling the EVP_Cipher() function. Impact summary: Applications calling EVP_Cipher() on an empty ciphertext and expecting the call to check the AEAD tag may accept forged messages. CWE: CWE-354 (Improper Validation of Integrity Check Value) Description: The EVP_Cipher() API call for AEAD ciphers behaves like a one shot encryption and decryption call. It also verifies the AEAD tag after the decryption operation. However for AES-OCB and ChaCha20-Poly1305 ciphers it skipped the AEAD tag verification when an empty ciphertext was passed to the function. The callers of this function might believe that a successful return indicates a valid AEAD tag for these ciphers, even when that has not truly been validated in this case. FIPS impact: no The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE as the affected algorithms are not FIPS approved and thus not implemented in the FIPS module.
CWE:   CWE-354: Improper Validation of Integrity Check Value
CVSS Source:   CISA ADP
CVSS Base score:   9.1
CVSS Vector:   (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N)

Affected Products and Versions

Affected Product(s)Affected Product Version(s)Affected Product Feature(s) or
License Program Product(s)
IBM i7.65733-SC1
IBM i7.55733-SC1
IBM i7.45733-SC1
IBM i7.35733-SC1

Remediation/Fixes

IBM strongly recommends addressing the vulnerability now.

IBM i Release5733-SC1
PTF Number(s)
PTF Download Link(s)
7.6SJ11605
SJ11597
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11605
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11597
7.5SJ11604
SJ11596
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11604
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11596
7.4SJ11603
SJ11595
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11603
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11595
7.3SJ11603
SJ11595
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11603
https://www.ibm.com/mysupport/s/fix-information?legacy=SJ11595

IBM recommends users running unsupported versions of affected products upgrade to a supported and fixed version of affected products.

Workarounds and Mitigations

None

Get Notified about Future Security Bulletins

References

Off

Acknowledgement

Change History

29 Sep 2026: Initial Publication

*The CVSS Environment Score is customer environment specific and will ultimately impact the Overall CVSS Score. Customers can evaluate the impact of this vulnerability in their environments by accessing the links in the Reference section of this Security Bulletin.

Disclaimer

According to the Forum of Incident Response and Security Teams (FIRST), the Common Vulnerability Scoring System (CVSS) is an "industry open standard designed to convey vulnerability severity and help to determine urgency and priority of response." IBM PROVIDES THE CVSS SCORES ""AS IS"" WITHOUT WARRANTY OF ANY KIND, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. CUSTOMERS ARE RESPONSIBLE FOR ASSESSING THE IMPACT OF ANY ACTUAL OR POTENTIAL SECURITY VULNERABILITY. In addition to other efforts to address potential vulnerabilities, IBM periodically updates the record of components contained in our product offerings. As part of that effort, if IBM identifies previously unidentified packages in a product/service inventory, we address relevant vulnerabilities regardless of CVE date. Inclusion of an older CVEID does not demonstrate that the referenced product has been used by IBM since that date, nor that IBM was aware of a vulnerability as of that date. We are making clients aware of relevant vulnerabilities as we become aware of them. "Affected Products and Versions" referenced in IBM Security Bulletins are intended to be only products and versions that are supported by IBM and have not passed their end-of-support or warranty date. Thus, failure to reference unsupported or extended-support products and versions in this Security Bulletin does not constitute a determination by IBM that they are unaffected by the vulnerability. Reference to one or more unsupported versions in this Security Bulletin shall not create an obligation for IBM to provide fixes for any unsupported or extended-support products or versions.

Document Location

Worldwide

[{"Business Unit":{"code":"BU070","label":"IBM Infrastructure"},"Product":{"code":"SWG60","label":"IBM i"},"Component":"","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.6.0, 7.5.0, 7.4.0, 7.3.0","Edition":"","Line of Business":{"code":"LOB68","label":"Power HW"}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSTS2D","label":"IBM i 7.3 Preventative Service Planning"},"Component":"","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.3.0","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SS9QQS","label":"IBM i 7.4 Preventative Service Planning"},"Component":"","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.4.0","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSB23CE","label":"IBM i 7.5 Preventative Service Planning"},"Component":"","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.5.0","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}},{"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSKWKM","label":"IBM i 7.6 Preventative Service Planning"},"Component":"","Platform":[{"code":"PF012","label":"IBM i"}],"Version":"7.6.0","Edition":"","Line of Business":{"code":"LOB57","label":"Power"}}]

Document Information

Modified date:
29 September 2026

Initial Publish date:
29 September 2026

UID

ibm17290097