Detailed System Requirements
Abstract
IBM Storage Protect 8.2.2 for Windows Server requirements and support.
Content
| Type of hardware | Hardware requirements |
|---|---|
| General | An AMD64 or Intel EMT-64 processor |
| Disk space | The following minimum values for disk space:
If a problem arises that requires diagnosis, it is optimal to have additional temporary space available for uses such as a first failure data capture (FFDC) log or in which to collect trace logs. Significant disk space is required for database and log files. The size of the database depends on the number of client files to be stored and the method by which the server manages them. The default active log space is 16 GB, the minimum that is needed for most workloads and configurations. When you create the active log, you need at least 64 GB to run replication. If replication and data deduplication are both being used, create an active log of 128 GB. Allocate at least three times the default active log space for the archive log (48 GB). Ensure that you have sufficient resources if you are using data deduplication or expect a heavy client workload. For optimal performance and to facilitate I/O, specify at least two equally sized containers or Logical Unit Numbers (LUNs) for the database. In addition, each active log and archive log needs its own container or LUN |
| Memory | The following minimum values for memory:
For more specific memory requirements for larger databases and higher ingestion capability, see the IBM Storage Protect server memory tuning table. |
| Type of software | Minimum software requirements |
|---|---|
| Operating System | One of the following 64-bit Standard or Datacenter edition operating systems:
We are deprecating support for Windows 2012. |
| Communication protocol | At least one of the following communication protocols (installed by default with the current Windows operating systems):
|
| Device drivers | The IBM Storage Protect passthru device driver that is required for non-IBM drives and tape libraries. The Windows native device driver is recommended for tape drives and tape libraries. Otherwise, the IBM Storage Protect kernel device driver can be used. For the IBM 3590, 3592, or the Ultrium tape library or drives, the IBM device drivers are required. Install the most current device drivers. You can locate IBM driver packages at Fix Central. Configure the device drivers before you use the IBM Storage Protect server with tape devices. |
| Other software | The following User Account Control policies must be disabled:
|
Was this topic helpful?
Document Information
Modified date:
31 July 2026
UID
ibm17275904