Security Bulletin: Vulnerabilities in kernel affects IBM Netezza Appliance

Vulnerability Details

CVEID:   CVE-2025-38110
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: net/mdiobus: Fix potential out-of-bounds clause 45 read/write access When using publicly available tools like 'mdio-tools' to read/write data from/to network interface and its PHY via C45 (clause 45) mdiobus, there is no verification of parameters passed to the ioctl and it accepts any mdio address. Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define, but it is possible to pass higher value than that via ioctl. While read/write operation should generally fail in this case, mdiobus provides stats array, where wrong address may allow out-of-bounds read/write. Fix that by adding address verification before C45 read/write operation. While this excludes this access from any statistics, it improves security of read/write operation.
CWE:   CWE-125: Out-of-bounds Read
CVSS Source:   NVD
CVSS Base score:   7.1
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H)

CVEID:   CVE-2025-38086
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: net: ch9200: fix uninitialised access during mii_nway_restart In mii_nway_restart() the code attempts to call mii-mdio_read which is ch9200_mdio_read(). ch9200_mdio_read() utilises a local buffer called "buff", which is initialised with control_read(). However "buff" is conditionally initialised inside control_read(): if (err == size) { memcpy(data, buf, size); } If the condition of "err == size" is not met, then "buff" remains uninitialised. Once this happens the uninitialised "buff" is accessed and returned during ch9200_mdio_read(): return (buff[0] | buff[1] 8); The problem stems from the fact that ch9200_mdio_read() ignores the return value of control_read(), leading to uinit-access of "buff". To fix this we should check the return value of control_read() and return early on error.
CWE:   CWE-908: Use of Uninitialized Resource
CVSS Source:   NVD
CVSS Base score:   5.5
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2025-37958
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix dereferencing invalid pmd migration entry When migrating a THP, concurrent access to the PMD migration entry during a deferred split scan can lead to an invalid address access, as illustrated below. To prevent this invalid access, it is necessary to check the PMD migration entry and return early. In this context, there is no need to use pmd_to_swp_entry and pfn_swap_entry_to_page to verify the equality of the target folio. Since the PMD migration entry is locked, it cannot be served as the target. Mailing list discussion and explanation from Hugh Dickins: "An anon_vma lookup points to a location which may contain the folio of interest, but might instead contain another folio: and weeding out those other folios is precisely what the "folio != pmd_folio((*pmd)" check (and the "risk of replacing the wrong folio" comment a few lines above it) is for." BUG: unable to handle page fault for address: ffffea60001db008 CPU: 0 UID: 0 PID: 2199114 Comm: tee Not tainted 6.14.0+ #4 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:split_huge_pmd_locked+0x3b5/0x2b60 Call Trace: TASK try_to_migrate_one+0x28c/0x3730 rmap_walk_anon+0x4f6/0x770 unmap_folio+0x196/0x1f0 split_huge_page_to_list_to_order+0x9f6/0x1560 deferred_split_scan+0xac5/0x12a0 shrinker_debugfs_scan_write+0x376/0x470 full_proxy_write+0x15c/0x220 vfs_write+0x2fc/0xcb0 ksys_write+0x146/0x250 do_syscall_64+0x6a/0x120 entry_SYSCALL_64_after_hwframe+0x76/0x7e The bug is found by syzkaller on an internal kernel, then confirmed on upstream.
CWE:   CWE-476: NULL Pointer Dereference
CVSS Source:   NVD
CVSS Base score:   5.5
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2025-37797
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: net_sched: hfsc: Fix a UAF vulnerability in class handling This patch fixes a Use-After-Free vulnerability in the HFSC qdisc class handling. The issue occurs due to a time-of-check/time-of-use condition in hfsc_change_class() when working with certain child qdiscs like netem or codel. The vulnerability works as follows: 1. hfsc_change_class() checks if a class has packets (q.qlen != 0) 2. It then calls qdisc_peek_len(), which for certain qdiscs (e.g., codel, netem) might drop packets and empty the queue 3. The code continues assuming the queue is still non-empty, adding the class to vttree 4. This breaks HFSC scheduler assumptions that only non-empty classes are in vttree 5. Later, when the class is destroyed, this can lead to a Use-After-Free The fix adds a second queue length check after qdisc_peek_len() to verify the queue wasn't emptied.
CWE:   CWE-416: Use After Free
CVSS Source:   NVD
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-22121
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: ext4: fix out-of-bound read in ext4_xattr_inode_dec_ref_all() There's issue as follows: BUG: KASAN: use-after-free in ext4_xattr_inode_dec_ref_all+0x6ff/0x790 Read of size 4 at addr ffff88807b003000 by task syz-executor.0/15172 CPU: 3 PID: 15172 Comm: syz-executor.0 Call Trace: __dump_stack lib/dump_stack.c:82 [inline] dump_stack+0xbe/0xfd lib/dump_stack.c:123 print_address_description.constprop.0+0x1e/0x280 mm/kasan/report.c:400 __kasan_report.cold+0x6c/0x84 mm/kasan/report.c:560 kasan_report+0x3a/0x50 mm/kasan/report.c:585 ext4_xattr_inode_dec_ref_all+0x6ff/0x790 fs/ext4/xattr.c:1137 ext4_xattr_delete_inode+0x4c7/0xda0 fs/ext4/xattr.c:2896 ext4_evict_inode+0xb3b/0x1670 fs/ext4/inode.c:323 evict+0x39f/0x880 fs/inode.c:622 iput_final fs/inode.c:1746 [inline] iput fs/inode.c:1772 [inline] iput+0x525/0x6c0 fs/inode.c:1758 ext4_orphan_cleanup fs/ext4/super.c:3298 [inline] ext4_fill_super+0x8c57/0xba40 fs/ext4/super.c:5300 mount_bdev+0x355/0x410 fs/super.c:1446 legacy_get_tree+0xfe/0x220 fs/fs_context.c:611 vfs_get_tree+0x8d/0x2f0 fs/super.c:1576 do_new_mount fs/namespace.c:2983 [inline] path_mount+0x119a/0x1ad0 fs/namespace.c:3316 do_mount+0xfc/0x110 fs/namespace.c:3329 __do_sys_mount fs/namespace.c:3540 [inline] __se_sys_mount+0x219/0x2e0 fs/namespace.c:3514 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x67/0xd1 Memory state around the buggy address: ffff88807b002f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88807b002f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88807b003000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88807b003080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88807b003100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Above issue happens as ext4_xattr_delete_inode() isn't check xattr is valid if xattr is in inode. To solve above issue call xattr_check_inode() check if xattr if valid in inode. In fact, we can directly verify in ext4_iget_extra_inode(), so that there is no divergent verification.
CWE:   CWE-125: Out-of-bounds Read
CVSS Source:   NVD
CVSS Base score:   7.1
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H)

CVEID:   CVE-2025-22113
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: ext4: avoid journaling sb update on error if journal is destroying Presently we always BUG_ON if trying to start a transaction on a journal marked with JBD2_UNMOUNT, since this should never happen. However, while ltp running stress tests, it was observed that in case of some error handling paths, it is possible for update_super_work to start a transaction after the journal is destroyed eg: (umount) ext4_kill_sb kill_block_super generic_shutdown_super sync_filesystem /* commits all txns */ evict_inodes /* might start a new txn */ ext4_put_super flush_work(&sbi-s_sb_upd_work) /* flush the workqueue */ jbd2_journal_destroy journal_kill_thread journal-j_flags |= JBD2_UNMOUNT; jbd2_journal_commit_transaction jbd2_journal_get_descriptor_buffer jbd2_journal_bmap ext4_journal_bmap ext4_map_blocks ... ext4_inode_error ext4_handle_error schedule_work(&sbi-s_sb_upd_work) /* work queue kicks in */ update_super_work jbd2_journal_start start_this_handle BUG_ON(journal-j_flags & JBD2_UNMOUNT) Hence, introduce a new mount flag to indicate journal is destroying and only do a journaled (and deferred) update of sb if this flag is not set. Otherwise, just fallback to an un-journaled commit. Further, in the journal destroy path, we have the following sequence: 1. Set mount flag indicating journal is destroying 2. force a commit and wait for it 3. flush pending sb updates This sequence is important as it ensures that, after this point, there is no sb update that might be journaled so it is safe to update the sb outside the journal. (To avoid race discussed in 2d01ddc86606) Also, we don't need a similar check in ext4_grp_locked_error since it is only called from mballoc and AFAICT it would be always valid to schedule work here.
CVSS Source:   NVD
CVSS Base score:   5.5
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2025-22091
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix page_size variable overflow Change all variables storing mlx5_umem_mkc_find_best_pgsz() result to unsigned long to support values larger than 31 and avoid overflow. For example: If we try to register 4GB of memory that is contiguous in physical memory, the driver will optimize the page_size and try to use an mkey with 4GB entity size. The 'unsigned int' page_size variable will overflow to '0' and we'll hit the WARN_ON() in alloc_cacheable_mr(). WARNING: CPU: 2 PID: 1203 at drivers/infiniband/hw/mlx5/mr.c:1124 alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Modules linked in: mlx5_ib mlx5_core bonding ip6_gre ip6_tunnel tunnel6 ip_gre gre rdma_rxe rdma_ucm ib_uverbs ib_ipoib ib_umad rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm fuse ib_core [last unloaded: mlx5_core] CPU: 2 UID: 70878 PID: 1203 Comm: rdma_resource_l Tainted: G W 6.14.0-rc4-dirty #43 Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:alloc_cacheable_mr+0x22/0x580 [mlx5_ib] Code: 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 41 52 53 48 83 ec 30 f6 46 28 04 4c 8b 77 08 75 21 0f 0b 49 c7 c2 ea ff ff ff 48 8d 65 d0 4c 89 d0 5b 41 5a 41 5c 41 RSP: 0018:ffffc900006ffac8 EFLAGS: 00010246 RAX: 0000000004c0d0d0 RBX: ffff888217a22000 RCX: 0000000000100001 RDX: 00007fb7ac480000 RSI: ffff8882037b1240 RDI: ffff8882046f0600 RBP: ffffc900006ffb28 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000007e0 R11: ffffea0008011d40 R12: ffff8882037b1240 R13: ffff8882046f0600 R14: ffff888217a22000 R15: ffffc900006ffe00 FS: 00007fb7ed013340(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb7ed1d8000 CR3: 00000001fd8f6006 CR4: 0000000000772eb0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: TASK ? __warn+0x81/0x130 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] ? report_bug+0xfc/0x1e0 ? handle_bug+0x55/0x90 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? alloc_cacheable_mr+0x22/0x580 [mlx5_ib] create_real_mr+0x54/0x150 [mlx5_ib] ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xca/0x140 [ib_uverbs] ib_uverbs_run_method+0x6d0/0x780 [ib_uverbs] ? __pfx_ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x10/0x10 [ib_uverbs] ib_uverbs_cmd_verbs+0x19b/0x360 [ib_uverbs] ? walk_system_ram_range+0x79/0xd0 ? ___pte_offset_map+0x1b/0x110 ? __pte_offset_map_lock+0x80/0x100 ib_uverbs_ioctl+0xac/0x110 [ib_uverbs] __x64_sys_ioctl+0x94/0xb0 do_syscall_64+0x50/0x110 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb7ecf0737b Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 48 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7d 2a 0f 00 f7 d8 64 89 01 48 RSP: 002b:00007ffdbe03ecc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffdbe03edb8 RCX: 00007fb7ecf0737b RDX: 00007ffdbe03eda0 RSI: 00000000c0181b01 RDI: 0000000000000003 RBP: 00007ffdbe03ed80 R08: 00007fb7ecc84010 R09: 00007ffdbe03eed4 R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffdbe03eed4 R13: 000000000000000c R14: 000000000000000c R15: 00007fb7ecc84150 /TASK
CWE:   CWE-190: Integer Overflow or Wraparound
CVSS Source:   NVD
CVSS Base score:   5.5
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H)

CVEID:   CVE-2025-22085
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix use-after-free when rename device name Syzbot reported a slab-use-after-free with the following call trace: ================================================================== BUG: KASAN: slab-use-after-free in nla_put+0xd3/0x150 lib/nlattr.c:1099 Read of size 5 at addr ffff888140ea1c60 by task syz.0.988/10025 CPU: 0 UID: 0 PID: 10025 Comm: syz.0.988 Not tainted 6.14.0-rc4-syzkaller-00859-gf77f12010f67 #0 Hardware name: Google Compute Engine, BIOS Google 02/12/2025 Call Trace: TASK __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0x16e/0x5b0 mm/kasan/report.c:521 kasan_report+0x143/0x180 mm/kasan/report.c:634 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 __asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105 nla_put+0xd3/0x150 lib/nlattr.c:1099 nla_put_string include/net/netlink.h:1621 [inline] fill_nldev_handle+0x16e/0x200 drivers/infiniband/core/nldev.c:265 rdma_nl_notify_event+0x561/0xef0 drivers/infiniband/core/nldev.c:2857 ib_device_notify_register+0x22/0x230 drivers/infiniband/core/device.c:1344 ib_register_device+0x1292/0x1460 drivers/infiniband/core/device.c:1460 rxe_register_device+0x233/0x350 drivers/infiniband/sw/rxe/rxe_verbs.c:1540 rxe_net_add+0x74/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0xde/0x1a0 drivers/infiniband/sw/rxe/rxe.c:212 nldev_newlink+0x5ea/0x680 drivers/infiniband/core/nldev.c:1795 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x6dd/0x9e0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8de/0xcb0 net/netlink/af_netlink.c:1883 sock_sendmsg_nosec net/socket.c:709 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:724 ____sys_sendmsg+0x53a/0x860 net/socket.c:2564 ___sys_sendmsg net/socket.c:2618 [inline] __sys_sendmsg+0x269/0x350 net/socket.c:2650 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f42d1b8d169 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 ... RSP: 002b:00007f42d2960038 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f42d1da6320 RCX: 00007f42d1b8d169 RDX: 0000000000000000 RSI: 00004000000002c0 RDI: 000000000000000c RBP: 00007f42d1c0e2a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f42d1da6320 R15: 00007ffe399344a8 /TASK Allocated by task 10025: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __do_kmalloc_node mm/slub.c:4294 [inline] __kmalloc_node_track_caller_noprof+0x28b/0x4c0 mm/slub.c:4313 __kmemdup_nul mm/util.c:61 [inline] kstrdup+0x42/0x100 mm/util.c:81 kobject_set_name_vargs+0x61/0x120 lib/kobject.c:274 dev_set_name+0xd5/0x120 drivers/base/core.c:3468 assign_name drivers/infiniband/core/device.c:1202 [inline] ib_register_device+0x178/0x1460 drivers/infiniband/core/device.c:1384 rxe_register_device+0x233/0x350 drivers/infiniband/sw/rxe/rxe_verbs.c:1540 rxe_net_add+0x74/0xf0 drivers/infiniband/sw/rxe/rxe_net.c:550 rxe_newlink+0xde/0x1a0 drivers/infiniband/sw/rxe/rxe.c:212 nldev_newlink+0x5ea/0x680 drivers/infiniband/core/nldev.c:1795 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x6dd/0x9e0 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] netlink_unicast+0x7f6/0x990 net/netlink/af_netlink.c:1339 netlink_sendmsg+0x8de/0xcb0 net ---truncated---
CWE:   CWE-416: Use After Free
CVSS Source:   CISA ADP
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H)

CVEID:   CVE-2025-21905
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: limit printed string from FW file There's no guarantee here that the file is always with a NUL-termination, so reading the string may read beyond the end of the TLV. If that's the last TLV in the file, it can perhaps even read beyond the end of the file buffer. Fix that by limiting the print format to the size of the buffer we have.
CWE:   CWE-125: Out-of-bounds Read
CVSS Source:   NVD
CVSS Base score:   7.1
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:H)

CVEID:   CVE-2024-57980
DESCRIPTION:   In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix double free in error path If the uvc_status_init() function fails to allocate the int_urb, it will free the dev-status pointer but doesn't reset the pointer to NULL. This results in the kfree() call in uvc_status_cleanup() trying to double-free the memory. Fix it by resetting the dev-status pointer to NULL after freeing it. Reviewed by: Ricardo Ribalda ribalda@chromium.org
CWE:   CWE-415: Double Free
CVSS Source:   NVD
CVSS Base score:   7.8
CVSS Vector:   (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H)