AIX 7.3 TL3 PEs Fixed In 7300-03-02-2546

APAR: IJ56147  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.0      bos.rte.methods
****************************************************************
* PROBLEM DESCRIPTION:
* skctl cannot set user key value. Get usage error as :
* skctl: nukeys must be off or a number between two and max. no.
*  of hardware keys.
* Usage: skctl  -D
*        skctl  -u /off   -k on/off/default
*        skctl  -v  now|default|boot
*        where:
*            -u    # number of user keys (2 - max. no.
*                                  of hardware keys)
*            -u off        # disable user keys
*            -k on/off     # enable/disable kernel keys
*            -k default    # set default kernel key state
*            -D            # use defaults
*            -v now        # view current settings
*            -v default    # view defaults
*            -v boot       # view settings for next boot
****************************************************************

APAR: IJ55855  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.mp64
****************************************************************
* PROBLEM DESCRIPTION:
* Auditing WPAR from the Global will be affected.
****************************************************************

APAR: IJ55513  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.alt_disk_install.rte
****************************************************************
* PROBLEM DESCRIPTION:
* Mksysb restoring will fail if we restore 7200-05 image
* in 7300-03 system.
****************************************************************

APAR: IJ55472  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.mp64
****************************************************************
* PROBLEM DESCRIPTION:
* AT the 7300-03 aix levels reads from snapshots may be
* slower.
* As an example, prior to TL3, the backup software was able
* to pull data from a jfs2 snapshot at greater than
* 100Mb/s.
* Starting with TL3 the speeds are in the range of 20Mb/s.
* This can be reproduced by scp to another host (writing
* to /dev/null) or simply copying from the mounted snap
* filesystem to a local /dev/null.
****************************************************************

APAR: IJ56363  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.liveupdate.rte
****************************************************************
* PROBLEM DESCRIPTION:
* Liveupdate fails.
****************************************************************

APAR: IJ55508  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.0      bos.net.ipsec.keymgt
****************************************************************
* PROBLEM DESCRIPTION:
* Starting at
* AIX 7200-05-08-2420/bos.net.ipsec.keymgt 7.2.5.202
* ikedb -p thows error "A LSP FUNCTION DETECTED A BAD
* PARAMETER
* This only occurs when using certificates and ASN1_DN |
* FQDN as identifiers rather
* than IP address.
* This is not the older similar apar:
* IJ38354: IKDEB -P THROWS ERROR "A LSP FUNCTION DETECTED A
* BAD PARAMETER" APPLIES TO AIX 7300-00 ? APAR status ?
****************************************************************

APAR: IJ55500  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.64bit
* 7.3.3.0      7.3.3.1      bos.adt.prof
* 7.3.3.0      7.3.3.1      bos.rte.control
* 7.3.3.0      7.3.3.1      bos.rte.libc
* 7.3.3.0      7.3.3.1      bos.rte.shell
* 7.3.3.0      7.3.3.1      mcr.rte
****************************************************************
* PROBLEM DESCRIPTION:
* Due to a code change that will sometimes utilize a
* module's method_getgracct function, running a command
* such as 'id ' may not show
* the full group membership for the user. 'at' jobs will
* fail also.
* This APAR will provide a fix for older modules like GSA
* that do not have a method_getgracct function defined.
* This fix will not help with any 3rd-party modules which
* do have a method_getgracct function defined, but do not
* return correct results when it is called. In that case,
* a fix will need to be obtained from the
* appropriate vendor.
****************************************************************

APAR: IJ55490  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.net.tcp.client_core
****************************************************************
* PROBLEM DESCRIPTION:
* no -L may display the value assigned to a different variable
* in some scenarios, although it is correctly set in the kernel.
****************************************************************

APAR: IJ55259  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.sysmgt.nim.client
****************************************************************
* PROBLEM DESCRIPTION:
* warning: 0042-001 m_instspot: processing error
* encountered on "master":
*    /usr/bin/lslpp: Fileset bos.sysmgt.smit not installed.
* rc=175
* 0042-175 c_instspot: An unexpected result was returned by
* the
*         "/usr/sbin/installp" command:
* warning: 0042-175 c_instspot: An unexpected result was
* returned by the
*         "/usr/sbin/unmount" command:
****************************************************************

APAR: IJ55693  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.1      7.3.3.1      bos.net.tcp.snmpd
****************************************************************
* PROBLEM DESCRIPTION:
* After switching SNMP from encrypted to non-encrypted using
* snmpv3_ssw -n, the symlink /usr/sbin/snmpd is correctly
* updated to point to /usr/sbin/snmpdv3ne. However, the
* command "trustchk -q /usr/sbin/snmpdv3ne" does not show
* /usr/sbin/snmpd under the symlinks field remains empty.
****************************************************************

APAR: IJ55684  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.hdcrypt
* 7.3.3.0      7.3.3.1      bos.mp64
* 7.3.3.0      7.3.3.1      bos.rte.lvm
****************************************************************
* PROBLEM DESCRIPTION:
* Displays below messages during LKU failure
* "syncvg on LV is in progress"
* "hdcryptmgr operation is in progress"
****************************************************************

APAR: IJ55348  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.1      7.3.3.1      bos.net.ipsec.rte
****************************************************************
* PROBLEM DESCRIPTION:
* consecutive LKU runs may fail with:
*     fake-init 1745591663.647 DEBUG  mcr_shlib_srm_aix -
* Shlib data starts with   0xce 0xea 0xce 0xea ...
*      KLVUPD 1745591663.648       ERROR - 4915398/12714149
* 0973-006 Checkpoint file probably corrupted
* (600000000001E)
* mcr: cke_errno 52 cke_Sy_error 23352 cke_Xtnd_error 20
* cke_buf
* When ipsec filters are enabled
****************************************************************

APAR: IJ55547  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      devices.chrp.pci.rte
* 7.3.3.0      7.3.3.1      devices.chrp.vdevice.rte
****************************************************************
* PROBLEM DESCRIPTION:
* Dynamic removal of memory can fail randomly on Power 10
* systems with AIX 7300-03 or VIOS 4.1.1 resulting in
* failure message on the HMC as only part of the requested
* memory size is removed.
* For instance:
* HSCL2932 The dynamic removal of memory resources failed:
* The operating system prevented all of the requested
* memory
* from being removed.
* Amount of memory removed: 1792 MB of 2048 MB.
* ...   ...   ...
****************************************************************

APAR: IJ55521  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.alt_disk_install.rte
****************************************************************
* PROBLEM DESCRIPTION:
* When performing a nimadm migration with disk caching, the
* following error messages appear during Phase 3:
* Syncing client data to cache ...
* backup: 0511-449 An error occurred accessing ./usr/opt/
* oss/lib/libcurl.a:
* A file or directory in the path name does not exist.
* backup: 0511-449 An error occurred accessing ./usr/opt/
* oss/lib/libjson-c.a:
* A file or directory in the path name does not exist.
****************************************************************

APAR: IJ55651  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.alt_disk_install.rte
****************************************************************
* PROBLEM DESCRIPTION:
* #nimadm -c nim_client -l lpp_source_1 -s spot_resource_1
* -d hdiskX -Y -U
* Initializing the NIM master.
* Initializing NIM client nim_client.
* Cleaning up alt_disk_migration on the NIM master
* #
****************************************************************

APAR: IJ56263  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      bos.mp64
****************************************************************
* PROBLEM DESCRIPTION:
* System crashed during abrupt stop of vfcquos service with
* following stack:
* KDB(8)> f
* pvthread+0DB000 STACK:
*  0002CD00 abend_trap+000000 ()
*  00081B4C xm_bad_free+00026C (??, ??, ??, ??)
*  00082238 xmdbg_do_xmfree_record+000198 (0000000000000000,
* F1000C0150000170, 0000000000000000, F1000C018A35AE00,
* F00000002FF464D0)
*  00113760 xmfree_backend+000840 (0000000000000001,
* F1000C0150000170, 0000000000000000, F1000C018A35AE00,
* 0000000F0000000F)
*  00112A88 xmfree_frontend+000128 (??, ??, ??)
*  00971D98 tuning_deregister+0000B8 (??)
*  00014F50 .kernel_add_gate_cstack+000030 ()
*  F1000A15D1407FEC npiv_qos_unregister_stats+00006C (??)
*  F1000A15D14063A4 svfc_config+0001A4 (??, ??, ??)
*  00014D70 .hkey_legacy_gate+00004C ()
*  008EF094 IPRA.$config_dd+000294 (??, ??, ??)
*  008EFBCC sysconfig+0001CC (??, ??, ??)
*  00003988 syscall+000248 ()
*  100005B4 main+000234 (00000002, 2FF22BA0)
*  100001B8 __start+000068 ()
****************************************************************

APAR: IJ56153  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.1      7.3.3.1      bos.alt_disk_install.rte
****************************************************************
* PROBLEM DESCRIPTION:
* nimadm not failing when UAK on lpar expired
****************************************************************

APAR: IJ56531  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      devices.pciex.df1060e214103404.com
****************************************************************
* PROBLEM DESCRIPTION:
* I/O may hang when Fibre Channel SCSI protocol device's(fscsiX)
* ODM tunable fast_lnk_recov is set to "yes" and followed by "no
* when when storage side FC link is unstable causing FC link
* is unstable causing FC link UP and Down repeatedly.
****************************************************************

APAR: IJ56539  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.1      7.3.3.1      bos.alt_disk_install.rte
****************************************************************
* PROBLEM DESCRIPTION:
* nimadm command execution from 7300-04 P10 NIM master fails on
* 7200-05 P8 NIM client, since UAK is not supported in P8
****************************************************************

APAR: IJ56600  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      devices.pciex.7710612214105006.com
****************************************************************
* PROBLEM DESCRIPTION:
* I/O may hang when Fibre Channel SCSI protocol device's(fscsiX)
* ODM tunable fast_lnk_recov is set to "yes" and followed by "no
* when when storage side FC link is unstable causing FC link
* and Down repeatedly.
****************************************************************

APAR: IJ56658  Fix available in service pack: 7300-03-02-2546

****************************************************************
* USERS AFFECTED:
* Systems running the 7300-03 Technology Level with
* any of the following filesets at or between the given levels:
* MIN          MAX          FILESET
* 7.3.3.0      7.3.3.1      devices.vdevice.IBM.l-lan.rte
****************************************************************
* PROBLEM DESCRIPTION:
* In SLIH path, processing the packets by disable the interrupts.
* It is causing one packet queued by in the phyp layer and the
* queued packet  will not get trigger interrupt until further
* packet gets queued up, it causes delay for the ACKs in case of
* single session backup application.
****************************************************************