Fix Readme
Abstract
On 26 February 2026, IBM released IBM® Maximo® Application Suite Manage Operator patch 9.0.23. As with all patches, it is cumulative. In addition to the new fixes listed here, all fixes from earlier patches for this version are included.
Content
This patch updates Manage to version 9.0.258
This patch uses Graphite 2.13.657
For Industry Solutions Patches, go to:
IBM Maximo Asset Configuration Manager patch 9.0.x (patch 9.0.109)
IBM Maximo Aviation patch 9.0.x (patch 9.0.38)
IBM Maximo Civil Infrastructure patch 9.0.x (patch 9.0.65)
IBM Maximo Health, Safety and Environment patch 9.0.x (patch 9.0.26)
IBM Maximo Nuclear Power patch 9.0.x (patch 9.0.15)
IBM Maximo Oil & Gas patch 9.0.x (patch 9.0.26)
IBM Maximo Service Providers patch 9.0.x (patch 9.0.18)
IBM Maximo Spatial Asset Management patch 9.0.x (patch 9.0.33)
IBM Maximo Transportation patch 9.0.x (patch 9.0.29)
IBM Maximo Utilities patch 9.0.x (patch 9.0.22)
Manage and Mobile APAR and Known Issue Fixes
When an APAR or Known Issue has Manual Change in the first column, click the link or go to the Manual Changes section for directions.
When an APAR or Known Issue has Behavior Change in the first column, click the link or go to the Behavior Changes section for information.
When an APAR or Known Issue has Behavior Change in the first column, click the link or go to the Behavior Changes section for information.
When an APAR or Known Issue has Database Change in the first column, click the link or go to the Database Change Details section for information.
| APAR | Application Name | Description |
|---|---|---|
| DT248195 Behavior Change | Work Order Tracking | In Preventive Maintenance, entering a value on the Meters tab, Generate WO Ahead By creates a Work Order early, but the system also moves the Target Start Date earlier than required. |
| DT418781 | Mobile | In a non-English base language environment in the Technician role-bases app, receiving Material in a work Order causes error "BMXAA4024E - The synonym value ISSUE is not valid for the domain ISSUETYP, siteid=XXX, orgid=YYY. Specify a valid synonym value. You can find a list of valid values using the Domain application." to display. |
| DT460858 | Service Request | In the Create Service Request Role‑Based Application, when a new Service Request is created using Describe the Request and the user selects Service Address and chooses Save My GPS Location, the operation never completes. |
| DT393727 | Spatial | In Maximo Mobile, the map zoom level loaded from the vtpk file has less granularity than the VTPK provides, causing the map to display a gray area. |
| DT450803 | Mobile | When a user analyzes a photo with MVI, the first option always appears selected when viewing the results in the Mobile application. |
| DT455346 | Mobile | In Inspections, batching does not work as expected. |
| DT456261 | UI | In the Security Groups application, Global Data Restrictions behave incorrectly. A restriction intended to make a field read‑only also prevents attachments from being added. |
| DT456299 | System (Object) | Cursors are left open for mafappdata query when stableId is null. |
| DT456659 | Collections | Adding Locations to a Collection does not update the value of orgid. |
| DT455986 | UI | In the Work Order Tracking Plans tab, the pagination bar is missing on 'Children of WO X' table when returning from 'Go To Work Order' navigation. |
| DT457171 | Scheduler/Crew | In the Graphical Scheduling application, when a user runs the Set Work to Day action, the system does not apply the correct DST adjustment. |
| DT457220 | Scheduler/Crew | In Work Order Tracking, when a user selects Complete Assignment from the Assignments tab for an assignment in ASSIGNED status, the system creates the expected LABTRANS record but does not change the assignment status to COMPLETE. |
| DT457229 | UI | In the Start Center on larger monitors, when a user zooms in, the system shows the horizontal scroll bar as expected. After the user zooms back out, the scroll bar remains visible instead of disappearing. |
| DT457411 | UI | In Environments in which Lithuanian set as as the secondary language, the system does not display Long Description text. |
| DT457684 | Mobile | In the Inspection Form application, duplicating a meter response field causes the meter value to not persist. |
| DT457705 Manual Change | Purchase orders | Canceling a Purchase Order referenced on an Invoice with no receipts displays the error BMXAA3335E – "Items have already been received for this purchase order.". |
| DT457935 | Mobile | In Work Order Tracking, when a user processes many Work Orders that include inspections and videos, the sync operation fails to complete. |
| DT458395 | Service items | Duplicating a Service Item with a Classification does not add the attributes to the new Item. |
| DT458494 | System UI | Users cannot open an attachment if a file name contains a full-width space. |
| DT458635 | System (Object) | Accessing the Swagger page using an API Key fails with "Failed to load API definition" message. |
| DT458704 | Configuration Tool | In MAF Tool versions 9.0.16–9.0.19, the TECHMOBILE preview works on first load, but after saving app.xml (even a whitespace change) and reloading Preview, the preview fails with a ModuleNotFoundError. |
| DT458787 | Mobile | Changing inspection status to Archived causes the Maximo Mobile application to reload repeatedly and crash. |
| DT459003 | Mobile | In the Mobile application, the Reservation count shown when adding an item in Issues and Transfer is inconsistent with the count in the Role‑Based Application, and the count changes each time the lookup is reopened. |
| DT459009 | Spatial | In Spatial, when the mapapp processes NAD83 Zone 11N coordinates from the Geocoder, the system returns an error. |
| DT459036 | Mobile | In Maximo Mobile, when a user performs a Data Update, the device sets the page size for most delta OSLC queries to a fixed value, not the page sizes defined in the app.xml files. |
| DT459045 | Mobile | In the Service Request Role-Based Application, selecting a location fails with error BMXAA4134E - "SADDRESSCODE did not validate.". |
| DT458658 | Work Order Tracking | In Data Sheets, the Required? button on the PM Work Order Data Sheet becomes editable when users enter and remove field values before saving. |
| DT459344 | Craft | Deleting a craft in "ORG B" fails with error BMXAA3454E - "Cannot delete craft MS because it is referenced by a QualCraftSkill", even though the dependency exists only in "ORG A." |
| DT459406 | Assets | While navigating Asset records, saving a new Asset without entering data triggers an error. When users return to the list view and click the next‑page arrow, the system displays "BMXAA6713E – The MBO fetch operation failed with SQL error code -4470.". |
| DT459605 | Mobile | In the Technician app, Flow-controlled tasks do not retain task change status. |
| DT459678 | UI | When the browser locale is set to Finnish, users cannot enter Labor Reporting in Role-Based Applications. |
| DT459714 | System (Object) | In the Manage application, when a build processes a customization archive whose S3 bucket region in the object URL contains hyphens, the build fails. |
| DT459788 | UI | In the Mobile Assets application, the Priority field shows an “invalid number” error because the smart‑input control does not handle a null value or clear the warning with an on‑blur event. As a result, the warning remains visible until an out‑of‑range value is entered and then corrected. |
| DT459979 | Mobile | In the Technician application, when a user selects the Back button, the system redirects to the Main List View instead of the Task List. |
| DT460073 | Mobile | In the Mobile Assets Role‑Based Application, the system retrieves vendor records from a different organization, even though vendor records are organization‑specific. |
| DT460233 | UI | In Communication Log, when a record has more than one attached file, the attachment links do not work. |
| DT460317 | Mobile | In Work Order creation, when a follow‑on Work Order is created with an SR originator, the API request creates both a Work Order and an SR, even though only the Work Order should be created. |
| DT460436 | Spatial | In Mobile applications, OpenStreetMap does not center on the Initial Extent when the map uses a latitude‑longitude coordinate system. |
| DT460858 | Mobile | In the Create Service Request Role‑Based Application, when a new Service Request is created using Describe the Request and the user selects Service Address and chooses Save My GPS Location, the operation never completes. |
| DT460983 | Scheduler/Crew | In the Scheduling applications, enabling Rolling is enabled on an existing scenario generates a second SKDPROJECTSCENARIO record, precenting Optimization from running. |
| DT461006 | Mobile | In Service Requests, a Classification Attribute that uses a Table Domain shows the lookup but does not display any values. |
| DT461780 | Mobile | On a mobile device, when a follow‑up Work Order is created, the system incorrectly marks the Asset status as Down even though the Asset is Up in the parent Work Order. |
| DT461835 | Scheduler/Crew | Auto Publish Fails Due to Duplicate SKDPROJECTSCENARIO Entries After Enabling Rolling |
| APAR | Change details | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Steps to Configure the Message
4. Click OK. |
| APAR | Change details |
|---|---|
| The Generate WO Ahead By (tolerance) setting no longer affects Units to Go, Estimated Next Due Date, or the Work Order Target Start Date. The system uses the tolerance only during Work Order generation. The tolerance allows a Work Order to be generated ahead of the actual frequency point without changing the Preventive Maintenance schedule. |
Related Information
[{"Type":"MASTER","Line of Business":{"code":"LOB77","label":"Automation Platform"},"Business Unit":{"code":"BU048","label":"IBM Software"},"Product":{"label":"IBM Maximo Application Suite","code":"SSRHPA"},"ARM Category":[{"code":"a8m3p000000hB0QAAU","label":"Manage"}],"Platform":[{"code":"PF025","label":"Platform Independent"}],"Version":"9.0.0"}]
Was this topic helpful?
Document Information
Modified date:
26 February 2026
UID
ibm17261738