How To
Summary
How to Remove / Install a Hard Drive From A Hard-Drive Carrier
Steps
Hard Drive Carrier – Removal and Installation Guide
Removing a Hard Drive from the Carrier
To safely remove a hard drive from its carrier, follow these steps:
- Unscrew the Slide Rails
Use a suitable screwdriver to remove the screws securing the slide rails on both sides of the hard drive carrier. - Lift the Drive Out
Gently lift the hard drive straight up and out of the carrier.
Installing a Hard Drive into the Carrier
⚠️ Important Safety Notice
Only perform this procedure if it is authorized in your product documentation or advised by official support. Unauthorized repairs may void your warranty. Always follow the safety instructions provided with your equipment.
To install a hard drive into the carrier:
- Insert the Drive
Place the hard drive into the carrier with the connector end facing the rear. - Align the Screw Holes
Match the screw holes on the drive with those on the carrier. The back of the drive should be flush with the rear edge of the carrier when aligned correctly. - Secure the Drive
Fasten the drive to the carrier using the appropriate screws.
Document Location
Worldwide
[{"Type":"MASTER","Line of Business":{"code":"LOB66","label":"Technology Lifecycle Services"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Product":{"code":"SSFBM70","label":"MVS Server - Dell"},"ARM Category":[{"code":"a8m3p000000PCVRAA4","label":"MVS Server-\u003EDell x86-\u003EPoweredge Rack-\u003E12-\u003ER720"}],"ARM Case Number":"","Platform":[{"code":"PF025","label":"Platform Independent"}]}]
Historical Number
2
Was this topic helpful?
Document Information
Modified date:
06 November 2025
UID
ibm17235807